MOTOROKR EQ5 Bluetooth Speaker Quick Start Guide DRAFT 6 - 11/30/07 Temp Page - To be discarded before printing use this template with A7MotoQSG StructApps
MOTOROKR EQ5 TM Quick Start Guide
welcome The MOTOROKR™ EQ5 Portable Bluetooth® Stereo Speaker lets you enjoy high definition stereo sound and convenient, handsfree communication in pocket-sized portability through wireless technology. 2 • Pocket rocker—The MOTOROKR EQ5 fits comfortably in your pocket—perfect for sharing your music on-the-move. • Small in size, big in sound—SRS™ WOW HD™ enhanced audio technology provides better width and improved bass and definition control for a rich music listening experience.
Note: Before using your speaker for the first time, be sure to review the important safety and legal pamphlet and follow instructions. Periodically review this information so you remember how to safely use your speaker.
before you begin Take a moment before you get started to familiarize yourself with the components of your speaker.
charge it You’ll need to charge your speaker’s battery for a minimum of 1 hour using the included Motorola charger. charge it 1 Plug the Motorola charger into the charging port on your speaker, as shown. The Power indicator light turns red when battery is charging. It may take up to 1 minute for the indicator light to turn on. When the speaker’s battery is fully charged, the Power indicator light turns green. 2 Disconnect the charger. Note: Speaker is functional during charging.
turn it on & off To turn your speaker on and off, slide the Power switch to the ON position. The main indicator light flashes 3 times.
connect wirelessly To listen to your music via Bluetooth wireless connection, as well as make and receive handsfree calls, you need to pair (link) it with your Bluetooth phone and/or music device. connect wirelessly 1 Turn off any Bluetooth devices previously paired with speaker. 2 Turn on the Bluetooth feature on your Bluetooth phone or music device. 3 Turn on your speaker. The main indicator light is steadily lit in blue to indicate the speaker is in discoverable mode.
connect wirelessly When your speaker successfully pairs and connects with your phone or music device, the main indicator light flashes blue and purple. Music playing from your connected music source is heard on your speaker. After you have successfully paired your speaker and Bluetooth device, you don't need to repeat these steps. For each use, ensure that your speaker is turned ON and that your device's Bluetooth feature is ON.
connect with wires To listen to your music via wired connection, connect your music device to the Audio port on your speaker using a 3.5mm cable (not included) as shown. connect with wires Music playing on your connected music source is heard on your speaker.
control wireless tunes Playback controls provided on your speaker can be used when listening to Bluetooth wireless streaming music with remote control capabilities.
crank it up To adjust music volume, use the Volume buttons on your speaker. crank it up When maximum or minimum volume is reached on your speaker, you’ll hear a tone. Note: To achieve desired volume, it may also be necessary to adjust the volume on your music player.
handsfree calls To make and receive calls, the speaker must be turned on, and a Bluetooth handsfree (HFP) connection must be established with your phone (see “connect wirelessly” on page 7 for details). handsfree calls You’ll use these controls and indicators on your speaker when making and receiving handsfree calls.
receiving calls When there’s an incoming call, the main indicator light flashes quickly in blue on your speaker and you hear ringing. If music is playing when a call is received, the music either automatically pauses or mutes depending on your music player and connection setup.
during calls When a call is active, the main indicator light slowly pulses in blue on your speaker.
during calls When there’s a second incoming call, the main indicator light flashes quickly in blue on your speaker and you hear ringing.
making calls To make a call, you can redial the last dialed number or make a voice dial call (if your phone supports this feature). When making a voice dial call, the microphone on the speaker is enabled and you hear a prompt from your phone.
check battery To check your speaker’s battery charge level, press and hold both Volume buttons. The main indicator light displays charge status until the Volume buttons are released. check battery Main Indicator Light Battery Charge Status Red Less than 10% charge Yellow Between 10% and 80% charge Green More than 80% charge When your speaker is in a low battery charge state, the main indicator light flashes quickly in red, and a tone is repeated every minute.
wireless status The main indicator light on your speaker displays current status of Bluetooth wireless connection(s) to your phone and/or music device.
wireless status Main Indicator Light Wireless Status long yellow pulse music streaming (without handsfree connection active) long purple pulse music from wired connection active three yellow flashes stopped music player slow red flash idle (not connected to a device) 19
extra tips TBD extra tips 20
f European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: • The essential requirements and other relevant provisions of Directive 1999/5/EC. • All other relevant EU Directives. Product Approval Number The above gives an example of a typical Product Approval Number. You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com www.hellomoto.com/Bluetoothsupport 1-877-MOTOBLU (Motorola Bluetooth Support) 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.