User's Manual

14 68P80801E35-A 9/1/2001
Troubleshooting EBTS System Manual - Vol 2
Generation 2 Single Channel BR Station Verification Procedures
4.1 At the BRC> prompt, type:
This command returns all active alarms of the Base Radio.
4.2 At the BRC> prompt, type:
If the
alarms command displays alarms, refer to the System
Troubleshooting section of this manual for corrective actions.
5. View the spectrum of the transmitted signal on the R2660 Communications
Analyzer in the Spectrum Analyzer mode. Figure 5 shows a sample of the
spectrum.
field> power -otx_all
field> alarms -ofault_hndlr
EBTS071
032394JNM
Figure 3 Generation 2 Carrier Spectrum