6864110w15o.
6864110w15o.
6864110w15o.book Page 1 Thursday, February 13, 2003 9:46 PM Contents Introduction ................................ 2 FCC Licensing Information ...... 4 Safety and General Information 6 Radio Controls ......................... 13 Getting Started ......................... 14 Installing the Swivel Belt Holster ................................. 14 Installing the Batteries ............ 15 Charging the Battery............... 16 Turning Your Radio On and Off........................................
6864110w15o.book Page 2 Thursday, February 13, 2003 9:46 PM Introduction Introduction 2 Thank you for purchasing a Motorola _Series Radio. Your radio is a product of Motorola’s 70 plus years of experience as a world leader in designing and manufacturing communications equipment. The _Series radios provide costeffective communications for businesses such as retail stores, restaurants, hotels, and schools.
6864110w15o.book Page 3 Thursday, February 13, 2003 9:46 PM T F A R D ATTENTION Before using this product, read the RF energy awareness information and operating instructions in the Safety and General Information section of this guide to ensure compliance with RF energy exposure limits. Introduction For product-related questions, please call: 1-800-448-6686 in the USA 1-888-390-6456 TTY (Text Telephone) On the Web: www.motorola.
864110w15o.book Page 4 Thursday, February 13, 2003 9:46 PM FCC Licensing Information FCC Licensing Information 4 _Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC. Application is made available on FCC Forms 601, schedules D and H, and remittance form 159.
be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.
6864110w15o.book Page 6 Thursday, February 13, 2003 9:46 PM Safety and General Information Safety and General Information 6 Important Information on Safe and Efficient Operation. Read This Information Before Using Your Radio. The information provided in this document supersedes the general safety information contained in user guides published prior to December 1, 2002. Transmit and Receive Procedure T F A R D Your two-way radio contains a transmitter and a receiver.
6864110w15o.book Page 7 Thursday, February 13, 2003 9:46 PM Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 Ministry of Health (Canada) Safety Code 6.
Safety and General Information 6864110w15o.book Page 8 Thursday, February 13, 2003 9:46 PM 8 Body-Worn Operation To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines.
Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices - Pacemakers The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of the U.S. Food and Drug Administration.
6864110w15o.book Page 10 Thursday, February 13, 2003 9:46 PM Safety and General Information Safety and General Use While Driving 10 Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please: • Give full attention to driving and to the road. • Use hands-free operation, if available. • Pull off the road and park before making or answering a call if driving conditions so require.
6864110w15o.book Page 11 Thursday, February 13, 2003 9:46 PM Operational Cautions Antennas Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot.
Safety and General Information 6864110w15o.book Page 12 Thursday, February 13, 2003 9:46 PM 12 4. To reduce the risk of damage to the cord or plug, pull the plug rather than the cord when disconnecting the charger from the AC receptacle. 5. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning. 6. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or personal injury. 7.
6864110w15o.
6864110w15o.book Page 14 Thursday, February 13, 2003 9:46 PM Getting Started Getting Started 14 Installing the Swivel Belt Holster 1. Slide the bottom of radio into the holster until it snaps into place. 2. To remove, push the tab on the holster and pull the radio away from the holster. Note: In case of loss, please contact your point-of-sale or call 1-800-448-6686 to request replacement part number HCLN4013.
Installing the Batteries Your radio uses a rechargeable Lithium Ion (Li Ion) battery or 3 AAA Alkaline batteries with the 1564200W18 Alkaline Battery Tray (not included with all models). Li Ion Battery 1. If the battery door is already in place on the radio, push down on the recess on the door and slide it off the radio. 2. Insert the battery, printed arrows first, into the battery compartment and press down to secure firmly in place. 3. Slide and snap the battery door into place. AAA Alkaline Batteries 1.
Getting Started 6864110w15o.book Page 16 Thursday, February 13, 2003 9:46 PM Charging the Battery Use only the charger supplied with the radio, or other _ Series power accessories. For optimum battery life, do not charge the battery for prolonged periods after it is fully charged. Charging the battery over the weekend is acceptable. Using the Drop-in Charger 1. Place the charger on a flat surface. 2. Insert the plug of the power cord into the jack on the charger. 3. Plug the cord into an AC outlet. 4.
Using the 56531 Multi-Unit Charger The Multi-Unit Charger (MUC) allows drop-in charging of 6 radios or batteries (56556 Li Ion rechargeable battery, SNN5571 only). Batteries can be charged inside the radios or removed and placed in the MUC separately. Each of the 6 charging pockets can hold a radio or battery, but not both. 1. Place the charger on a flat surface. 2. Insert the power cord plug into the jack on the MUC. 3. Plug the cord into an AC outlet. 4. Turn the radio off. 5.
Getting Started 6864110w15o.book Page 18 Thursday, February 13, 2003 9:46 PM Charging Status LEDs On the drop-in (single radio) charger, the radio and battery charging pockets have their own LEDs. On the MUC, each of the 6 charging pockets has an LED. The LEDs are grouped into pairs to show which charging pockets are paired (for cloning, see page 32). The LED is solid red when the battery is charging, and solid green when charging is complete.
6864110w15o.book Page 19 Thursday, February 13, 2003 9:46 PM T F A R D When you turn the radio on, the radio chirps and the display briefly shows all features and display segments. The radio then displays the current channel (larger number in the center) and the frequency assigned to that channel (on the right indicated by l). Getting Started Turning Your Radio On and Off See page 13 for a basic radio diagram. Turn P clockwise to turn the radio on, and counterclockwise to turn the radio off.
6864110w15o.book Page 20 Thursday, February 13, 2003 9:46 PM Getting Started Adjusting the Volume Turn P clockwise to increase the volume, and counterclockwise to decrease the volume. Note: Do not hold the radio too close to your ear when adjusting the volume.
6864110w15o.book Page 21 Thursday, February 13, 2003 9:46 PM Talking and Receiving 1. Press and hold T to check for channel activity. If you hear static, the channel is clear to use. Do not transmit if someone is speaking on the channel. Press T again to stop monitoring. 2. To talk, press and hold Push to Talk and speak into the microphone. Hold the radio 2 to 3 inches away from your mouth. 3. To listen, release Push to Talk. T F A R D The transmit light on the top of the radio is red when transmitting.
6864110w15o.book Page 22 Thursday, February 13, 2003 9:46 PM Talking and Receiving Talk Range 22 Industrial Multi-Level Outdoor Inside steel/concrete industrial buildings Inside multi-level buildings Flat ground with no obstructions Up to 200,000 sq. ft. Up to 15 floors Up to 5 miles T F A R D Handsfree Use (CLS1410 only) The CLS1410 model radio can operate handsfree when used with or without compatible voice activation (VOX) accessories.
6864110w15o.book Page 23 Thursday, February 13, 2003 9:46 PM T F A R D Setting the VOX Sensitivity You can adjust the sensitivity of your radio’s accessory or microphone during VOX operation to suit different operating environments. These menus appear only if the VOX feature is in use, which is indicated by g. 1. Press S until g displays. The radio displays H if you are setting the external VOX (with audio accessory) or I if you are setting the internal VOX (without accessory). 2.
6864110w15o.book Page 24 Thursday, February 13, 2003 9:46 PM Talking and Receiving Locking the Keypad You can lock the keypad to avoid accidentally changing your radio settings. 1. Press and hold S for 3 seconds. 2. To unlock, press and hold S for 3 seconds. 24 Monitoring a Channel Monitoring allows you to check for activity on a channel. 1. Press and hold T. If the channel is clear to use, you will hear static and w and 0 will display. 2. Press T again to stop monitoring.
To talk to the person transmitting without switching channels, press Push to Talk within 5 seconds. If no transmission occurs within 5 seconds, scanning resumes. If you press Push to Talk while the radio is scanning, the radio transmits on the channel you were on before you started scanning. To stop scanning, briefly press T. Skipping and Removing Channels While Scanning Scan has several temporary features to make it easier to use.
6864110w15o.book Page 26 Thursday, February 13, 2003 9:46 PM Programming Features Programming Features 26 Programming mode allows you to change the following settings on your radio: • Channel • Frequency • Interference eliminator code • Call tones • Microphone gain • Scan list (CLS1410 only) • Available channels (CLS1410 only) Notes: • To talk with someone on your two-way radio, the channel, frequency, and interference eliminator code must be the same on both radios.
6864110w15o.book Page 27 Thursday, February 13, 2003 9:46 PM Factory Default Settings Your radio is programmed at the factory to the following settings: Channel CLS1110 CLS1410 1 2 2 2 3 4 Code Call Tone/ VibraCall® VOX Microphone Gain T F A R D 8 Not available 5 6 1 Off (0) Not available Off (0) Programming Features Frequency 2 (medium sensitivity) To restore the factory settings, turn the radio on while holding Push to Talk and S for 3 seconds.
Programming Features 6864110w15o.book Page 28 Thursday, February 13, 2003 9:46 PM 28 Entering Programming Mode Press and hold Push to Talk and T for 3 seconds while turning the radio on. The radio beeps and displays k, the channel number flashes, and the frequency (indicated by l) and code (indicated by y) display alternately. Selecting a Channel (CLS1410 Only) 1.
Programming the Interference Eliminator Code The interference eliminator code helps minimize interference by providing you with code combinations that filter out static, noise, and unwanted messages. 1. In programming mode, press S until y displays and the code number flashes. 2. Press [ or ] to select the code (see page 42). 3. Press and hold Push to Talk to exit programming mode, or press S to continue programming.
Programming Features 6864110w15o.book Page 30 Thursday, February 13, 2003 9:46 PM 30 Programming Call Tones and VibraCall® (CLS1410 only) Your radio can transmit call tones to other radios in your group so you can alert them that you are about to talk. Your radio comes with call tones turned off (set to 0), but you can change this setting to choose a distinctive call tone.
Programming Microphone Gain You can adjust the microphone sensitivity to suit different users or operating environments. 1. In programming mode, press S until g and ? display. 2. Press [ or ] to select the sensitivity level: 3 = High sensitivity, for quiet environments 2 = Medium sensitivity (default) 1 = Low sensitivity, for loud environments 3. Press and hold Push to Talk to exit programming mode, or press S to continue programming.
6864110w15o.book Page 32 Thursday, February 13, 2003 9:46 PM Cloning Radio Settings Cloning Radio Settings 32 You can duplicate _ Series radio settings from one radio (the source) to a second radio using the 5653 Multi-Unit Charger (MUC) optional accessory. See the MUC User's Guide for more information. You can clone only one radio at a time. A multi-channel radio can clone to a singlechannel radio, but only the first channel is cloned. The MUC does not need to be plugged in for cloning. 1.
6864110w15o.book Page 33 Thursday, February 13, 2003 9:46 PM Advanced Features Press This Button While Turning the Radio On Default Setting Turn Keypad Tones On/Off Turns keypad beeps off for silent menu operation. [ On Turn End-of-Transmission Tone On/Off If enabled, your two-way radio transmits a tone when you finish transmitting (like saying Roger or Over). If keypad tones are off and end-of-transmission tone is on, you will not hear the end-of-transmission tone, but it is transmitted.
6864110w15o.book Page 34 Thursday, February 13, 2003 9:46 PM Advanced Features To Do This 34 Press This Button While Turning the Radio On Default Setting Turn Battery Save Mode On/Off Decreases attack time, which is the brief period of time between when the radio receives a Push to Talk T [ transmission on its frequency and broadcasts audio. Turning battery save mode off decreases battery life by approximately 20%. On Restore Factory Defaults Returns radio to its original factory settings.
6864110w15o.book Page 35 Thursday, February 13, 2003 9:46 PM Symptom Try This: No Power Recharge or replace Li Ion battery. Reposition or replace Alkaline batteries. Message not transmitted Make sure Push to Talk is completely pressed while transmitting. Recharge, replace, and/or reposition batteries. Verify the transmit light is illuminated while speaking. T F A R D Hearing other Frequency or interference eliminator code may be in use.
Troubleshooting 6864110w15o.book Page 36 Thursday, February 13, 2003 9:46 PM 36 Symptom Try This: Limited talk range Steel and/or concrete structures, heavy foliage, buildings, or vehicles decrease range (see page 22). Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio. Message not received Confirm radios have the same channel, frequency, and interferene eliminator code settings (see page 26).
Symptom Try This: Low batteries Recharge or replace batteries. Extreme operating temperatures affect battery life. Charger light does not come on Reinsert radio and/or battery. Clean battery and/or charger contacts. Verify that the charging pin on the transformer is inserted correctly into the drop-in charger. AAA cells installed in radio. Remove and replace with Li Ion battery.
6864110w15o.book Page 38 Thursday, February 13, 2003 9:46 PM Use and Care Use and Care XXX Use a soft damp cloth to clean the exterior. Do not use alcohol or cleaning solutions. If the radio is submerged in water... Turn radio off and remove batteries. 38 T F A R D Do not immerse in water. Dry with soft cloth. Do not use radio until completely dry.
6864110w15o.book Page 39 Thursday, February 13, 2003 9:46 PM These charts provide frequency information and are useful when using Motorola _ Series radios with other business radios. Frequency Display Number is identical to Spirit M, GT, and S-Series frequency position (where applicable). UHF Frequencies Display Number T F A R D Frequency (MHz) Bandwidth 1 464.5000 2 464.5500 3 467.7625 4 467.8125 5 467.8500 6 467.8750 7 Display Number Frequency (MHz) Bandwidth 12.5 15 461.1875 12.
6864110w15o.book Page 40 Thursday, February 13, 2003 9:46 PM Frequencies and Bandwidths UHF Frequencies (Continued) 40 Display Number Frequency (MHz) Bandwidth Display Number Frequency (MHz) Bandwidth 11 461.0875 12.5 25 462.8125 12.5 12 461.1125 12.5 26 462.8375 12.5 13 461.1375 12.5 27 462.8625 12.5 14 461.1625 12.5 28 462.8875 12.5 29 462.9125 12.5 43 466.2625 12.5 30 464.4875 12.5 44 466.2875 12.5 31 464.5125 12.5 45 466.3125 12.5 32 464.5375 12.
6864110w15o.book Page 41 Thursday, February 13, 2003 9:46 PM Display Number Frequency (MHz) Bandwidth Display Number Frequency (MHz) Bandwidth 38 466.1375 12.5 52 467.9125 12.5 39 466.1625 12.5 53 469.4875 12.5 40 466.1875 12.5 54 469.5125 12.5 41 466.2125 12.5 55 469.5375 12.5 42 466.2375 12.5 56 469.5625 12.
6864110w15o.book Page 42 Thursday, February 13, 2003 9:46 PM Frequencies and Bandwidths Interference Eliminator Codes Display Number Code (Hz) Display Number Code (Hz) Display Number Code (Hz) 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 4 77.0 5 79.7 6 82.5 7 85.4 8 88.5 9 91.5 10 94.8 T F A R D 16 114.8 29 179.9 17 118.8 30 186.2 18 123.0 31 192.8 19 127.3 32 203.5 20 131.8 33 210.7 21 136.5 34 218.1 22 141.3 35 225.7 23 146.
6864110w15o.
6864110w15o.
6864110w15o.book Page 45 Thursday, February 13, 2003 9:46 PM The _Series radio replaces the Spirit GT Series radio. The factory default settings for both radios are identical. However, existing radios may have been programmed to different settings. To program your _Series radio to talk with a Spirit GT Series radio, verify or change your Spirit GT settings as follows. To verify the frequency and code: 1. Press the Menu button 3 times. The channel number and frequency display. 2. Press Menu again.
6864110w15o.book Page 46 Thursday, February 13, 2003 9:46 PM Motorola Limited Warranty for the United States and Canada Warranty What Does this Warranty Cover? 46 Subject to the exclusions contained below, Motorola, Inc.
6864110w15o.book Page 47 Thursday, February 13, 2003 9:46 PM Length of Coverage Ninety (90) days from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. T F A R D Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries.
6864110w15o.book Page 48 Thursday, February 13, 2003 9:46 PM Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. Communication Services.
6864110w15o.book Page 49 Thursday, February 13, 2003 9:46 PM What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts.
6864110w15o.book Page 50 Thursday, February 13, 2003 9:46 PM Warranty What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
6864110w15o.book Page 51 Thursday, February 13, 2003 9:46 PM _Series Programming Quick Reference To enter programming mode, press and hold Push to Talk and Qfor 3 seconds while turning the radio on. The radio beeps and displays k, the channel number flashes, and the frequency (indicated by l) and code (indicated by y) display alternately. T F A R D Set the Channel* Set the Frequency Set the Interference Eliminator Code Set Available Channels* * CLS1410 Only Press [ or ]. Press S until l displays.
6864110w15o.book Page 52 Thursday, February 13, 2003 9:46 PM _Series Programming Quick Reference Press S until E display.s Set a Call Tone Press [ or ] to select1, 2, or 3 for audible call tones, 4 for VibraCall, or 0 for off (default). T F A R D Press S until g and ? display. Set the Microphone Gain Press [ or ] to select: 1 Low sensitivity 2 Medium sensitivity 3 High sensitivity Press S until h displays and the channel number and Y or n flash.
6864110w15o.book Page 53 Thursday, February 13, 2003 9:46 PM motorola.
