How-To Guide

19
Dual Watch Mode
Enables you to scan the current channel and
another channel alternately.
Setting Another Channel and Starting
Dual Watch
1. Press Menu/Lock button until appears. The
flashes.
2. Press or to select the channel, then press .
3. Press or to select the code.
4. Press the PTT button or wait until the time out to activate
Dual Watch. The screen alternates between Home
Channel and Dual Watch Channel.
5. To end Dual Watch mode, press Menu/Lock button.
Note: If you set the same channel and code as
current channel, Dual Watch does not work.
TM
1. To turn vibrating alerts on, press Menu/Lock button
until is displayed. The current setting flashes.
2. Press or to change the setting to On/Off.
3. Press the PTT button to confirm and exit Menu or
Menu/Lock button to continue set up.
Keypad Tones
You may enable or disable the keypad tones. You
hear the key tone each time a button is pushed.
1. Press Menu/Lock button until appears. The
current setting On/Off flashes.
2. Press either or to turn On or Off.
3.
Press the PTT button to confirm and exit menu or
Menu/Lock button to continue set up.
Note: When the keypad tone feature is off, the
following are not disabled:
• Transmit timeout alert tone
VibraCall Alert
VibraCall
TM
is a vibrating alert that notifies you that
• Call tone
• Low battery alert tone
• Talk confirmation tone
your radio is receiving a message. This is useful in
noisy environments. The Vibrate Alert is triggered
when you received a call. It is triggered again if
there is no activity within 30 seconds after the
previous call.
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone
when you finish transmitting. It is like saying “Roger”
or “Over” to let others know you are finished talking.
English