How-To Guide

ManualsBrandsMotorola Solutions ManualsElectronicsConsumer Radio 462-467MHz and Weather Band receiver

Built-in LED Flashlight

Press the flashlight button to turn the light ON.

Press the flashlight button again to turn the light OFF.

Note: Turn off the flashlight when not in use to

conserve battery power.

Built-in LED Flashlight with Power Outage

Function (For T478 Radio Only)

The T478 radio LED flashlight has an additional

power outage function. The power outage function

is enabled when the radio is connected to a power

outlet.

The flashlight is turned on automatically when

power is cut while the radio is charging in the

charging tray or connected to the micro-USB

charger cable. The flashlight is turned off when the

power returns.The flashlight is turned off

automatically after 30 minutes to conserve battery

power.

Keypad Lock

To avoid accidentally changing your radio settings:

Press and hold Menu/Lock button until displays.

When in lock mode, you can turn the radio ON and OFF,

adjust the volume, receive, transmit, send a call tone,

send Emergency Alert, turn the LED flashlight ON and

OFF, and monitor channels. All other functions are

locked.

To unlock the radio, press and hold Menu/Lock

button until is no longer displayed.

Easy Pairing

The Easy Pairing feature allows a group of radio

users to program all their radios to the same

Channel and Interference Eliminator Code settings

quickly and simultaneously. Any one radio within the

group can be designated as the “Leader’s radio”

and have it’s Channel and Interference Eliminator

Code settings transmitted to and copied by all the

other radios in the group (Members’ radios).

Pick any one of the radios as the “Leader’s radio”. On this

radio, program the Channel and Interference Eliminator

Code to the desired settings.(See “Selecting the

Channel” and “Selecting the Interference Eliminator

Code” sections in this user manual).

To copy the channel and Interference Eliminator Code

combination to all the other “Members’ radios”, press and

hold the button on the Members’ radios until you hear a

beep. Release the button after the beep, and wait for the

transmission from the Leader’s radio.

Note:

•

The icon blinks on the display. This confirms that the

radio is in Easy Pairing mode waiting to receive the

Channel and Interference Eliminator Code settings from

the Leader’s radio. All Members’ radios remains in this

mode for 3 minutes.

•

A group with many radios should have all users take this

step at the same time, so all radios can be programmed

in one go.

English