Motorola iDEN Digital Multi-service Data-capable Phone i605 Phone User’s Guide APPROVAL DRAFT @NNTN6007A@ NNTN6007A
Contents Getting Started........................................... 1 Locating Your SIM Card ....................................2 Battery ...............................................................3 Activating Service..............................................5 Powering On and Off.........................................6 Enabling Over-the-Air Security..........................6 Phone Programming .........................................7 Finding Your Phone Number and Private ID .....
Viewing Entries................................................31 Deleting Entries ...............................................33 Checking Capacity ..........................................33 Creating Pauses and Waits.............................33 International Numbers .....................................34 Making Calls From Contacts ...........................34 Accessing Contacts with GSM Phones ...........35 Call Forwarding........................................ 36 Forwarding All Calls ..........
Messages ................................................. 59 Message Notifications .....................................59 Message Center ..............................................60 Voice Mail Messages ............................... 61 Receiving a Message ......................................61 Accessing Voice Mail From the Message Center ...................................61 Sending Unanswered Calls to Voice Mail ...................................................61 MOSMS Messages ...............
Java Applications .................................... 81 GPS Enabled.............................................95 Installing Applications......................................81 Running Applications.......................................81 Suspending Applications .................................81 Resuming Applications....................................82 Ending Applications.........................................82 Downloading Applications ...............................82 Deleting Applications....
Using Settings ...............................................113 Understanding Status Messages ..........126 Profiles ................................................... 118 Safety and General Information ............129 Viewing Profiles.............................................118 Switching Profiles ..........................................118 How Changing Settings Affects Profiles........118 Temporary Profiles ........................................119 Creating Profiles..........................
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i605 Model Number: H58XAN6RR4AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules.
Getting Started retractable antenna p volume controls Navigation key — press the arrows to scroll through menus and lists. audio jack Push-To-Talk (PTT) button Power button. O OK key — selects highlighted item; answers calls. m Menu key — accesses context-sensitive menus. A Option key — selects the option appearing above it on the display. s Send key — places phone calls. e End key — ends phone calls; returns to idle screen.
Getting Started Locating Your SIM Card t t . . Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery. Turns Private/group/SDG call speaker on and off; used with voice names and voice records. Accesses recent calls; sends incoming calls to voice mail. SIM card holder SIM card To start using your i605 phone: • • • • Make sure your SIM card is in place. Charge the battery. Activate your service.
Battery Battery Inserting the Battery Removing the Battery Door 1 Remove the battery door. 2 Insert the top of the battery into the battery area. Press the bottom of the battery to secure it. 1 Make sure the phone is powered off. 2 Slide the release button back until it releases the battery door. release button 3 Replace the battery door and press it gently until you hear a click. 3 Allow the battery door to pop up, slide it forward, and remove it from the back of your phone.
Getting Started 2 Open the connector cover. Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out. 4 When charging the battery for the first time, charge for 30 minutes longer than the time shown in “Charging Times”. connector cover 3 Plug the other end of the charger into the accessory connector. Charging Times Check your battery and charger type against the grid below to determine appropriate charging times.
Activating Service Removing the Battery 1 With your phone powered off, remove the battery door. 2 Remove the battery by pushing it toward the antenna and lifting it out. • The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity. Sleep Mode Your phone uses Sleep mode to conserve battery power. With Sleep mode, after your phone has been idle for a specified interval, the display on your phone will turn off.
Getting Started A screen then appears prompting you to select Ok to update your browser information. This screen will only appear during initial activation. See “Enabling Over-the-Air Security” on page 6. Powering On and Off The first time you power your phone on, a screen may appear asking you to update your browser information. This means you must enable security. To power your phone on, press p. To power your phone off, press and hold p.
Phone Programming Note: If you press A under Later, you will be prompted to enable security each time you power on your phone until you press A under Ok. 2 Press A under Ok. 3 You are prompted to enable security. Press A under Yes. A series of screens appears. If you subscribe to your service provider’s plan, your home page appears. 4 Press e to return to the idle screen.
Getting Started Display Options status icons Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it. text area Menus and Lists Your phone’s features are arranged in menus, submenus, and lists. menu icon display options The screen shown is the idle screen. The text that appears on your idle screen depends on your service provider. The idle screen appears when your phone is on, but not engaged in any activity.
Phone Basics • Confirms actions • Places and answer calls c VoiceRecord Record and play audio messages. See page 78. Menu Key j My Info Access personal phone information, including phone number and Private ID. See page 76. l GPS Find your approximate geographical location. See page 95. d Contacts View, store, edit contacts. See page 27. e Messages Access messages. See page 59. Many features provide context-sensitive menus that let you access related features and actions.
Getting Started s Shortcuts Create shortcuts to screens. See page 123. p Profiles Groups of settings you apply together. See page 118. k Call Alert Lists call alerts. See page 21. B Bluetooth Connect to a device with Bluetooth. See page 87. Quick Access to Main Menu Items Each arrow in the navigation key and O can be used to access a main menu item from the idle screen. Each of these keys is assigned to a main menu item when you receive your phone.
Phone Basics G J H K I L Call Forward — Your phone is set to forward calls. See page 36. Y Z Packet Data — You are ready to transfer packet data or are transferring packet data. See page 42. QRM Ringer Off — Your phone is set not to ring. See page 54. N u Speaker Off — Sounds associated with Private calls and group calls are set to come through the earpiece rather than through the speaker. TTY — You are ready to use your phone to make calls using a teletypewriter device. See page 43.
Getting Started SIM Card Security Your SIM card stores all your Contacts and protects your personal information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card. Note: Except for making emergency calls, your phone will not function without the SIM card. To prevent unauthorized use of your phone, your SIM card may be protected by a PIN that you enter each time the phone is powered on.
SIM Card Security Turning the PIN Requirement On and Off When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls. When the PIN requirement is off, your phone can be used without entering a PIN. Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected.
Getting Started Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information.
Antenna 3 Carefully slide your SIM card into your phone, until it lies flat in the SIM card holder. 2 While holding the tab down, slide your SIM card out of the SIM card holder. SIM card holder SIM card holder Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. Note: Protect your SIM card as you would any delicate object. Store it carefully.
Getting Started Important: Failure to fully extend or retract the antenna until the antenna clicks into place causes severely degraded performance, which may result in missed calls, dropped calls, or garbled audio. Accessories To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. Note: When you place your i605 phone into the holster, your phone goes into Sleep mode.
Making Calls Your i605 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls 1 Enter the number you want to call. 2 To place the call: Tip: To let someone know you want to talk to him or her on a Private call, send a call alert. See “Call Alerts” on page 21. Receiving Calls Phone Calls When you receive a phone call, your phone rings, vibrates, or lights up its backlight.
Making Calls Answering 1 Wait for the caller to finish speaking. 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. Ending Press e. -orPress A under Exit. A Private call ends automatically if there is no activity on the call for a few seconds. Choosing a Number to Call You can choose the number you want to call in many ways: • Enter the number on the keypad. See “Entering Numbers From the Keypad” on page 11.
Missed Phone Calls Your phone plays the name back to you. Redialing the Last Number If you are making a phone call, the call is placed automatically. Press and hold s to place a call to the last phone number you called. Tip: To stop a phone call from being completed, press . if the flip is closed or press e. If you are making a Private call, press and hold the PTT button to place the call.
Making Calls Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: Press A under Mute. While mute is on, Unmute appears as a display option. To turn mute off: Press A under Unmute. Making Emergency Phone Calls Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone. Dial 911 to be connected to an emergency response center.
Call Alerts Receiving Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do. When you send a call alert, the recipient’s phone emits a series of beeps, or vibrates, and displays your name or Private ID.
Call Alerts Viewing Call Alerts 4 Press the PTT button until Alert Successful appears on the display. 1 From the main menu, select Call Alert. 2 Scroll through the list. Deleting Call Alerts Viewing Date and Time To delete a call alert from the queue: To view the date and time a call alert was received: 1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press O or press A under Yes to confirm. 1 From the main menu, select Call Alert.
Recent Calls The recent calls list stores information associated with calls you have made and received and call alerts you have received. It also stores My Info and contact information sent to you from other phones. The recent calls list stores up to 20 items. Calls and Call Alerts The recent calls list stores the numbers of up to 20 of the most recent calls you have made and received.
Recent Calls If you receive My Info from the same phone more than once, only the most recently sent version appears in the recent calls list. Contact Information From Other Phones When you select contact information to view its details, you see the name or Private ID of the person who sent the information and all the information in the item. If you receive contact information with the same name from the same phone more than once, only the most recently sent version appears in the recent calls list.
Storing Items to Contacts 2 Select Recent Calls View. 3 Select List View to show the recent calls list without pictures. -orSelect Picture View to show the picture associated with each entry. Storing Items to Contacts 1 From the recent calls list, scroll to or select the item you want to store. 2 Press A under Store. -orIf Store is not one of your options: Press m. Select Store or Update Contacts.
Recent Calls • If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it. • If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information. • If you scroll to contact information from another phone, you can make a call to any of the numbers in the contact information. 3 To place the call now, go to step 4.
Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains: • A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry.
Contacts • A number or address — Each Contacts entry must contain a number or address. This may be any type of phone number, Private ID, Talkgroup number, SDG list number, email address, or IP address. Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 33. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.
Creating Entries 4 To assign a Contacts type to the number or address being stored: Select the Contacts type field. Select the Contacts type you want to assign. 5 To store a number or address: Select the # field (or ID for an email address, or IP for an IP address). Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 57. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo.
Contacts Assigning a Speed Dial Number or Voice Name 1 If you have not already, select [Options]. 2 The default Speed Dial number assigned to a phone number is displayed in the Speed # field. This is always the next available Speed Dial location. If you want to assign the phone number to a different Speed Dial location: With the Speed # field highlighted, press O. Press A under Delete to delete the current Speed Dial number. Enter the new Speed Dial number using the keypad. When you are finished, press O.
Viewing Entries 3 Follow the applicable instructions in “Creating Entries” on page 28 to edit the various fields. Selecting an Entry Viewing Entries Viewing the Contacts List • • • • In this view, each entry shows: To select an entry: • The name assigned to the entry • A small version of the picture assign to the entry, if you have set Contacts to show pictures in the Contacts list. • The types of numbers and addresses stored in the entry 1 From the Contacts list, select the entry you want to view.
Contacts If the you select a phone number, you can view its Speed Dial number and see whether it has a voice name. To return to the entry, press A under Back or press O. Viewing a Large Picture To view a large version of the picture assigned to an entry: 3 Select List View to show the Contacts list without pictures. -orSelect Picture View to show the picture assigned to each entry. Searching for a Name To search for a name in Contacts: 1 From the Contacts list, press A under Search.
Deleting Entries To set Contacts to show all entries: Note: If an entry contains only one number or address, deleting the number or address deletes the entry. 1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show All. Checking Capacity Deleting Entries To see how many numbers are stored in Contacts: Delete an Entry 1 From the Contacts list, scroll to or select the entry you want to delete. 2 Press m. 3 To delete the entire entry, select Delete Contact.
Contacts If you want a pause longer than 3 seconds, press and hold * more than once. Each P represents a 3-second pause. To program a wait: Press and hold * until the letter W appears. The W means your phone waits before dialing further. If you store 17035551235W1234, when you select this number and make a call, your phone dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits. Press A under Yes to dial the last 4 digits.
Accessing Contacts with GSM Phones If you are making a phone call: • Your phone places the call to the phone number assigned to the Contacts type displayed. • If the Contacts type displayed is not a phone number, your phone places the call to the phone number stored in the Contacts entry. • If the Contacts type displayed is not a phone number and you have more than one phone number stored in the Contacts entry, your phone prompts you to select the phone number you want to place the call to.
Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: G Phone line 1 is active; calls to phone line 1 are being forwarded.
Forwarding Missed Calls All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail. Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Forwarding Missed Calls You can specify a forwarding number for each type of missed call: • If Busy — Your phone is on a call or transferring data. • If No Answer — You do not answer on the first 4 rings.
Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call. To accept the second call and put the active call on hold: Press A under Yes. To accept the second call and end the active call: 1 Press e. Your phone rings with the second call.
Putting a Call on Hold Putting a Call on Hold Merging 2 Calls into a 3-Way Call 1 While on an active call, press m. 2 Select Hold. After you put a call on hold and place a second call, you can combine these calls into a 3-way call: If you want to make the call active again, press A under Resume. 1 Press m. 2 Select Join. Calling 2 People All 3 people in the call can speak to and hear each other. Putting a Call on Hold, Making a Second Call 1 2 3 4 Place or receive a phone call.
Advanced Calling Features Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For information on using pauses and waits, see “Creating Pauses and Waits” on page 33. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause. 2 Press m. 3 Select Insert Pause. 4 Enter the digits you want to occur after the pause. Making International Calls Note: This feature may not be offered by your service provider.
Call Timers To the Any Private ID 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button: Enter the number using your keypad. -orPress A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. Tip: If you are entering a Talkgroup number, enter # before the number. 3 Press O.
Advanced Calling Features Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only. Using Your Phone as a Modem Connecting with a Data Cable To use a data cable to connect your phone with a laptop, handheld device, or desktop computer: 1 Open the connector cover Note: This feature may not be offered by your service provider. You can use your phone as a modem with a laptop, handheld device, or desktop computer.
Making TTY Calls 3 Insert the data plug into the data port of the other device. Connecting with Bluetooth To use your phone as a modem via Bluetooth, the other device must have a Bluetooth adaptor installed. Check that the adaptor is properly installed, and then follow the specific instructions outlined in the device’s user guide to connect the device with your phone.
Advanced Calling Features Turning On the TTY Feature To change mode during a call using your phone: Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on: 1 Press m. 2 Select In Call Setup > TTY > Type. 3 Select the mode you want. From the main menu, select Settings > Phone Calls > TTY > Use TTY. This field must say On.
Making TTY Calls To change the TTY baud rate: 1 From the main menu, select Settings > Phone Calls > TTY > Baud. 2 Select the baud rate for your location.
Group Calls and Selective Dynamic Group Calls Group Calls and Selective Dynamic Group Calls Set-up Your phone gives you 2 ways to call more than one Private ID at once: • Group calls — calls to a Talkgroup • Selective Dynamic Group calls — calls to a SDG list Note: In order to store SDG lists to your i605, you must use a SDG-capable SIM card. For more information about SDG-capable SIM cards, contact your service provider.
Selective Dynamic Group (SDG) Calls Joining a Talkgroup Receiving Group Calls Your sales representative or your service provider establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts. To answer a group call: To receive group calls made to any of these Talkgroups, you must join the Talkgroup. 1 Press A under Contcs. -orFrom the main menu, scroll to Contacts and press O.
Group Calls and Selective Dynamic Group Calls You can create a SDG list for one call only or store it to Contacts so you can call it any time. You can use Send via PTT to send SDG lists to other phones that have this capability. Creating SDG Lists in Contacts 1 From the main menu, select Contacts. 2 Select [New SDG List]. Note: You can also create a SDG list by selecting [New Contact] and assigning the SDG contact type. 3 If you want to assign a name to the SDG list, enter the name.
Selective Dynamic Group (SDG) Calls Select [Add Number] and press A under Browse. Moving Between Contacts, Recent Calls, and Memo 2 To view the recent calls list, scroll left or right. -or- While adding members or numbers to a SDG list, you can press m to access Contacts, Recent Calls, or Memo. Press m and select Recent Calls. 3 Select the members you want from the list. 4 Press A under Done. From Memo 1 While creating a SDG list, select [Add Member]. -orSelect [Add Number] and press A under Browse.
Group Calls and Selective Dynamic Group Calls Storing SDG Lists Faster From Recent Calls Enter or select a Private ID and add more Private IDs. See “Starting a SDG Call with a Private ID” on page 50. 1 From the recent calls list, select the SDG list you want. 2 Press A under Store. 3 If you want, add more information to the entry. 4 Press A under Save. 2 Press the PTT button. From an Active SDG Call 1 Choose the first Private ID that you want in the SDG call: 1 During an active SDG call, press m.
Selective Dynamic Group (SDG) Calls Receiving SDG Calls To answer a SDG call: Proceed as if answering a Private call. Only one person at a time may speak on a SDG call.
Group Calls and Selective Dynamic Group Calls Note: If you choose to include yourself and the list already contains 20 members, you will be prompted that list is full. You will be excluded from the list. 5 Enter the Private ID of the person you want to send the SDG list to. -orSelect Browse to select a contact from Recent Calls, Contacts, or Memo. 6 Press O. 7 To send the SDG list, push the PTT button. The SDG list will display in the recent calls list on the phone that you send the SDG list to.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later: 1 From the main menu, select Memo. To delete the memo: To store the memo number to Contacts: 1 2 3 4 From the main menu, select Memo. Press m. Select Store to Cntcs. To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry.
Ring Tones Setting Your Phone to Vibrate To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT, or Datebook reminders: You can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, SDG calls, call alerts, message notifications, pictures sent using Send via PTT, and Datebook reminders. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off.
Ring and Vibrate These icons indicate how the ringer is set. Q The phone always vibrates instead of making a sound. R The phone vibrates instead of making a sound for phone calls. u Group calls, SDG calls, and Private calls are heard through the earpiece, not the speaker. These icons may appear at the same time. Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off.
Ring Tones 6 Scroll to view ring tones assigned to features and Contact entries. Note: Ring tones are stored in your phone using the same memory space used to store messages, Java application data, items accessible through the media center, and voice records created when your phone is in a call. Deleting some of these other items frees memory for ring tones. Downloading More Ring Tones If you want to use other ring tones, you can download them into your phone for a fee. Go to www.motorola.
Entering Text Using Word Mode You can enter text, numbers, and symbols into your phone using Alpha, Word, Numeric, or Symbol text input modes. In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word. You can add you own words to this database. l Alpha — Press a key several times for each character.
Entering Text Adding Words to the Database Capitalization 1 2 3 4 When you press and hold the # key, it acts as a 3-way toggle. Press and hold # to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters. Select Alpha as your text input mode. Type the word using Alpha mode. Select Word as your text input mode. Press #. The word you typed in Alpha text entry mode is now in the database.
Messages You can receive the following types of messages on your phone: • Voice mail messages • Short Message Service (SMS) text messages • Depending on your service provider, you may have the option to receive fax mail and Net alerts. You have 2 ways to access the messages you receive: • Respond to the message notification that appears when the message is received. • Dismiss the message notification and access the message later through the message center.
Messages • Delay All — Tones for all types of messages are held until you end calls. Tip: To set notification options during a call: Press m. Select In Call Setup > Notifications. Message Center The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 From the main menu, select Messages. 2 Scroll to the type of message you want to access.
Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it: Press e. -orPress A under No. To call your service provider’s voice mail system and listen to the message: Press A under Call.
MOSMS Messages Note: This feature may not be offered by your service provider. If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using MOSMS. Setting Up Before you begin using MOSMS, you may need to set up your signature, service center number, and expiration information: 1 2 3 4 5 When you are finished, press O. 7 Select Expire After.
Reading from the Message Center If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area. Tip: While reading a text and numeric message that contains a phone number, you can press s to call that number. Reading from the Message Center 1 From the main menu, select Messages > Text Inbox. 2 Select the message you want to read.
MOSMS Messages To use a quick note: Press A under Browse. Scroll to the quick note you want. For more information on quick notes, see “Using Quick Notes”. When you are finished, press O. 4 If you want to send the message, press O or press A under Send. -orTo delete the message without sending it, press A under Cancel. -orIf you want to request confirmation of delivery, save the message as a draft, or set the sending method, press m. Select the option you want.
Creating and Sending Messages Using Drafts Deleting Sent Messages When you save a message as a draft, it is saved in the drafts folder. To delete a sent message: To edit a draft: 1 From the main menu, select Messages > Drafts. 2 Select the draft you want to edit. 3 To edit the fields you want to change, follow step 2 through step 4 in “Creating and Sending Messages” on page 63. Resending Messages To resend a message: 1 From the main menu, select Messages > Text Outbox.
MOSMS Messages 4 Select Lock. Unlocking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press A under Unlock. Sorting Messages You can sort messages in your inbox by sender, time and date, and status. You can sort messages in your outbox by recipient, time and date, and status. 1 From the main menu, select Messages > Text Inbox or Messages > Text Outbox. 2 Highlight any messages. 3 Press m. 4 Select Sort and Order.
Media Center The media center lets you access pictures and audio recordings. All pictures saved in your phone can be accessed through the media center. The following audio recordings can be accessed through the media center: • Voice records created when your phone was not in a call • Musical ring tones in the list of ring tones • Audio recordings you downloaded to your phone Pictures in the media center can be sent in Private calls using Send via PTT. See “Using Send via PTT” on page 73.
Media Center Keeping the Last Filter Setting Sorting by Time or Name You can set the media center to show all items every time you access it or to keep the filtering setting you had when you last viewed it. You can set the media center to sort items by the time the item was created or by the name of the item. 1 2 3 4 1 2 3 4 5 Access the media center. Press m. Select Setup. Select Remember Filter to keep the filtering setting you had when you last viewed the media center.
DRM Items When you view items in the media center, one of these icons appears next to each forward locked item: f Forward locked. c Forward lock and locked. When an item is locked, it cannot be deleted from the media center. See “Locking Items” on page 71. Locking an item has no effect on its forward locking. DRM Items Except for java applications, which download to Java Apps, the default location for any DRM items that you download is the media center.
Media Center To store the number to an existing entry, select the entry. Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned. 5 If you selected an entry with a picture assigned, press O or press A under Yes to overwrite the assigned picture. -orPress A under No to return to the list of entries without overwriting the assigned picture. Setting as Wallpaper 1 Scroll to or select the picture you want to set as wallpaper.
Renaming Items 3 Select Assign As Ringer. 4 Select the Contacts entry you want to assign the ring tone to. Note: You cannot assign a voice record as the ring tone for a Contacts entry. Renaming Items 1 2 3 4 5 Access the media center. Scroll to or select the item you want to rename. Press A under Rename. Delete the item’s name and enter a new name. Press O. Locking Items When you lock an item in the media center, it cannot be deleted until you unlock it. 1 Access the media center.
Media Center 3 Select Delete All. 4 Press O or A under Yes to confirm. Managing Memory To view your used memory, free memory, and memory capacity: 1 Access the media center. -orScroll to or select any item in the media center. 2 Press m. 3 Select Memory Usage. To free memory, delete items in the media center. Note: Items in the media center are stored in your phone using the same memory space used to store messages, Java applications data, and voice records created when your phone is in a call.
Using Send via PTT Send via PTT lets you exchange My Info and contact information with other phones that have this capability. You can also receive pictures. You do this through Private calls. Send via PTT cannot be used during group calls. Tip: If you want to stop the transmission before it is finished, press A under Cancel. Declining a Picture When you see the message asking you if you want to accept the picture, press A under No. The picture is not transmitted.
Using Send via PTT Sending My Info You can control what portion of the information in My Info is sent and whether it is sent automatically in every Private call or only when you choose to send it. See “Setting Sending Options” on page 77. Tip: When you send My Info, certain information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send. Sending Information During a Call 1 While in a Private call, press m.
Sending My Info and Contact Information 2 Press m. 3 Select Send Contact via PTT. 4 Use the keypad to enter the Private ID you want to send. -orPress A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 5 When Ready to Send appears on the display, press the PTT button to send the information. Receiving My Info or Contact Information When you receive My Info or contact information from another phone, an icon appears on the display: j My Info. d Contact information.
My Info My Info lets you view information about your phone and send this information to other phones. Viewing My Info 1 From the main menu, select My Info. 2 Scroll to see the entire screen. The My Info screen contains: • My Name — You can enter your name here. • Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. Each number appears when you receive your first call on that line. • Private — Your Private ID is the number that others use to contact you using Private calls.
Setting Sending Options You can also edit the information in Line 1, Line 2, and Ckt, but your changes are only temporary. The next time your phone registers on the network, the your actual phone numbers and circuit data number appear again in My Info. Setting Sending Options Your phone can send information in My Info to other phones that have this capability.
Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself when your phone is not in a call or record phone calls when your phone is in a call. Voice records created when your phone is not in a call can be accessed through the media center. Viewing Voice Records To view your list of voice records: 1 From the main menu, select VoiceRecord. 2 Scroll to view more voice records.
Playing Voice Records 2 Say the message you want to record into the microphone. Tip: To stop recording before you are finished, press A under Pause. To start recording again, press A under Resume. To stop recording and discard the voice record at any time, press A under Cancel. 3 When you are finished recording, press O. To add to the end of an existing voice record: 1 2 3 4 5 From the main menu, select VoiceRecord. Scroll to the voice record you want to add to. Press m. Select Add To.
Voice Records 4 Select Lock to lock the message. -orSelect Unlock to unlock the message. When a voice record is locked, this icon R appears next to it. Deleting Voice Records Deleting a voice record from the voice record list deletes it from all parts of your phone, including the media center. Deleting a Voice Record 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm.
Java Applications 2 If you have selected a suite of applications, select the application you want to run. Your phone arrives with Java applications loaded and ready to install. You can download and install more Java applications. To run an application that does not have a shortcut on the main menu: Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone. Installing Applications 1 From the main menu, select Java Apps.
Java Applications Resuming Applications You can resume a suspended application at any time. This brings it to the foreground. 6 If you want to end all applications without letting them exit, press A under EndNow. Downloading Applications 1 From the Java menu, select Suspended Apps. 2 Select the application you want to resume. If you want to run more Java applications, you can download them into your phone. Ending Applications Go to www.motorola.
Managing Memory 6 When your phone has finished deleting the application, press A under Done. To delete all Java applications: 1 2 3 4 5 From the main menu, select Java Apps. Scroll to Java System. Press m. Select Delete All. Press O or press A under Yes to confirm. Managing Memory To view the amount of memory available for Java applications: Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu.
Java Applications 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for. 4 Press O. 5 Press A under Done. Java Applications and GPS Enabled Some Java applications can make use of your phone’s GPS feature to determine the approximate geographical location of your phone. (See “GPS Enabled” on page 95 for more information on the GPS feature.
Java Applications and GPS Enabled When a Java application requests access to the location of your phone, a screen appears informing you. To deny this request: 1 Press A under Deny. The application does not access the location of your phone. 2 Select the denying option you want: • Always — If the application requests access to the location of your phone again, the request is denied without notifying you.
Java Applications • Always — The application always has permission to access the location of your phone, without notifying you. • Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 84). • Never — When the application requests access to the location of your phone, the request is denied without notifying you.
Understanding Bluetooth® Access Settings Bluetooth® Your i605 phone is a Bluetooth device. Bluetooth devices create seamless voice and data connections with other Bluetooth devices, such as another Bluetooth phone, a Bluetooth pen, headset, or dongle. These connections are made wirelessly. You can use your i605 phone to send information such as Contacts entries, Datebook events, and pictures to another Bluetooth device. Devices must be within 32 feet (10 meters) of your phone to be recognized.
Bluetooth® • Device name • Voice recognition and dialing 3 Press O. Turning Bluetooth® On or Off Some Bluetooth devices use voice dialing. When you receive your phone Bluetooth, voice dialing is turned off. You can turn power to your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices. You can turn off Bluetooth if you want to prolong battery life or you enter an area where Bluetooth is prohibited. The default setting is Off.
Making a Bluetooth® Connection Making a Bluetooth® Connection Note: You must grant the device’s request in order to receive information from the device on your phone. The following sections cover how to connect your phone to another Bluetooth device. Note: Some Bluetooth devices only have full functionality when DTMF dialing is set to On. See “Phone Calls Features” on page 114. Sharing Your Phone’s Bluetooth Address ® To bond with your phone, devices must have your phone’s Bluetooth address.
Bluetooth® If you search for devices and you select a device that you are currently bonded with from the list of found devices, then the current bond with that device will be voided. You will have to re-establish the bond. Your i605 requires that you create a bond in order to connect with another device. However, you can choose to establish bonds with devices without connecting. Note: Devices are automatically granted permission during the 10 seconds after bonding.
Setting Device Details Your phone will connect to the device. Using Bluetooth During a Call ® During a call, you can connect with available Bluetooth devices. To view the device history, from the main menu, select Bluetooth > Device History. From the device history, you can: 1 While in a call, press m. Select Use Bluetooth. 2 Select the device you want to connect to.
Bluetooth® 4 Select Name. 5 Enter the new name. Note: A device name can have a maximum of 40 characters. Sending Contacts, Datebook Events and Pictures 6 Press O. Bluetooth lets you send Contact entries, Datebook events or pictures you have stored in the media center to connected devices. Editing Device Access Settings Sending Contacts 1 From the main menu, select Bluetooth > Device History. 2 Scroll to the device you want to set access for. 3 Press A under Edit or press O. 4 Select Access.
Receiving Items 3 Press m. 4 Select Transfer. 5 If the event you select repeats, then you will be prompted to choose whether to send the selected instance of the event or all instances of the event. To send only the selected instance of the event, select This Event Only. -orTo send all instances of the event, select Repeat Events. 6 Select Bluetooth. 7 Select the device you want to transfer to. -orSearch for the device you want to transfer to by selecting [Find Devices]. 8 If prompted, bond with the device.
Bluetooth® Viewing and Storing Received Items After an incoming transfer is complete, your phone translates the item. The item appears on your phone’s display. You can choose to either store or discard the items. Items are stored as follows: Contact entries to Contacts, pictures to the media center and Datebook events to Datebook. To store the item, press A under Store or press O. -orTo discard an item without saving it, press A under Discard.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
GPS Enabled • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate.
Viewing Your Approximate Location GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. In some cases, your local 911 emergency response center may not be equipped to receive GPS location information.
GPS Enabled • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Refresh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”.
Enhancing GPS Performance To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
GPS Enabled • Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance. • In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window.
Setting Privacy Options Setting Privacy Options Your phone’s GPS privacy options control whether Java applications on your phone or other software applications may view the location of your phone.You may set your phone to one of these GPS privacy options. Note: Privacy options do not apply to the transmission of location information during emergency 911 calls. To set your GPS privacy options: 1 From the main menu, select GPS > Privacy. 2 If your GPS PIN security feature is enabled, enter your GPS PIN.
GPS Enabled To change your GPS PIN: 1 From the main menu, select Settings > Security > Change Password > GPS PIN. 2 Enter the current GPS PIN. Note: When you receive your phone, your GPS PIN is 0000. 3 4 5 6 7 Press A under Ok. Enter the new 4- to 8-digit GPS PIN. Press A under Ok. Enter the new 4- to 8-digit GPS PIN to confirm. Press A under Ok.
Using GPS with Map Software Getting Started To connect your phone to your laptop or other device: 1 Open the connector cover. 3 Insert the data plug into the COM port of your laptop or other device. Make sure no other application is using the COM port selected. Make sure the COM port settings of your laptop or other device are set to the following: connector cover 2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.
Datebook Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date. A Datebook event contains: • A subject — A name you assign to the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event. • A location — The location of the event. You can also enter a phone number, Private ID, or Talkgroup number here.
Creating Events To view an event: Creating Events 1 Select the day the event occurs. 2 Select the event. Every Datebook event must have a subject and be stored to a date. Other information is optional. To change the current view: You may enter the information in any order by scrolling through the event details. 1 While viewing Datebook, press m. 2 Select the view you want. Navigating Datebook After you have entered the information you want, you can press A under Done to store the event to Datebook.
Datebook 3 If you want to assign a location to the event: Select Location. Enter the date you want. 7 If you want to make the event a recurring event: Enter the location. -or- Select Repeat. Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number. Select the repeat cycle you want. When you are finished, press O. 4 The start time automatically assigned to an event is the beginning of the day.
Editing Events Assigning More Options Editing Events To assign more options before storing an event: To change the details of an event: 1 If you have created a reminder for the event and want to set the ring tone for that reminder: 1 Select the day the event occurs. 2 Select the event. 3 Press A under Edit. Tip: To copy an event to another date: Press m. Select Copy. Select Ring Tone. Select the ring tone you want from the ring tones stored in your phone.
Datebook Receiving Reminders For Events with Numbers to Call If you created a reminder for a Datebook event, when the reminder time occurs, your phone notifies you with text on the display and a reminder tone. If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from the reminder for that event. To view more details about the event: Press A under View. To dismiss the reminder: Press O.
Customizing Datebook Setup To make a Private call or group call: Press and hold the PTT button on the side of your phone. -orIf you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup. To send a call alert: Press m. Select Alert # in Event. • Time Shift — lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone. • Alert Timeout — sets the amount of time a tone continues to sound when you receive a Datebook reminder.
Customizing Your Phone Setting the Volume Of the Earpiece and Speaker 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -orScroll to Speaker to set the speaker volume. 3 To set the volume: Scroll left or right. -orPress the volume controls. Of the Ringer Press the volume controls.
Changing the Look of Your Phone Wallpaper Including Pictures From the Media Center A wallpaper is an image that appears on the idle screen. If you have set wallpapers to change automatically, you can include pictures stored in the media center as images that may appear on the idle screen. Note: Some themes may prevent you from changing your wallpaper. Choosing a Wallpaper 1 From the main menu, select Settings > Display/Info > Wallpaper > Wallpaper. 2 Select the wallpaper you want.
Customizing Your Phone Setting Contrast To set the contrast of the display: 1 From the main menu, select Settings > Display/Info > Contrast. 2 Scroll left or right to set the contrast. Setting the Menu View You can set the items on your main menu and Java applications menu to appear as large icons or a list: 1 From the main menu, select Settings > Display/Info > Menu View. -orFrom the main menu: Press m. Select Main Menu Setup > Menu View. 2 To choose a list, select List View.
Temporarily Turning Off Calls Setting Sleep Mode Sleep mode turns off your phone’s display if your phone remains idle for a specified interval. Sleep mode conserves battery power. You can set your phone to enter Sleep mode after 1 minute, 3 minutes, 5 minutes or 15 minutes of inactivity. To set the interval for Sleep mode: 1 From the main menu, select Settings > Display/Info > Sleep Mode. 2 Select the interval you want.
Customizing Your Phone • Sleep — controls the interval that elapses before your phone enters sleep mode. • Clock — controls whether the time and date appear on the idle screen; sets time and date format; sets year. • Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list. • Large Dialing — sets large digits to appear on the idle screen when you enter a number. • Contrast — sets the contrast of the display.
Using Settings • One Touch PTT — See “One Touch PTT” on page 40. • Alert Type — controls how your phone notifies you when you receive Private calls, SDG calls, and group calls. • PTT Picture — sets your phone’s ability to send and receive pictures in Private calls. See “Using Send via PTT” on page 73. Personalize Features The Personalize menu makes main menu items easier to access.
Customizing Your Phone • Java Earpiece — sets the volume of sound associated with Java applications coming out of the earpiece. • Java Speaker —sets the volume of sound associated with Java applications coming out of the speakers. • Data — sets the volume of sounds that notify you that you are receiving a circuit data call.
Using Settings • Return to Home — controls how long the recent calls list displays after calls. • Airplane Mode — prevents your phone from making or receiving phone calls, Private calls, SDG calls, or group calls; or transferring data. • Phone Only — prevents your phone from making or receiving Private calls or group calls, or transferring data. Note: This feature may not be offered by your service provider.
Profiles Viewing Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. To view the profiles stored in your phone: A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 54, except assigning ring tones to Contacts. • Display/Info — sets Wallpaper, Color Palette, Text Size, and Backlight options. See “Display/Info Features” on page 113. • Phone Calls — sets Set Line and Auto Ans options.
Temporary Profiles When you do this, your phone either: Temporary Profiles • Updates the profile in effect to reflect these changes, without notifying you -or• Creates a temporary profile that contains these changes Note: This feature may not be offered by your service provider. If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles.
Profiles 2 3 4 5 Scroll to the temporary profile. Press m. Select Store As New. Enter the name you want to give the profile. When you are finished, press O. To overwrite the profile the temporary profile is based on: 1 2 3 4 From the main menu, select Profiles. Scroll to the temporary profile. Press m. Select Store Changes. The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone.
Setting Call Filtering 5 Press O or press A under Yes to confirm. To delete all profiles: 1 2 3 4 From the main menu, select Profiles. Press m. Select Delete All. Press O or press A under Yes to confirm. Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores. To set call filtering: 1 While setting options for a profile, select Call Filter.
Profiles • Off sets your phone to notify you of all messages. • Voice Messages sets your phone not to sound a tone or vibrate when you receive voice messages. • Text Messages sets your phone not to sound a tone or vibrate when you receive text messages. • All sets your phone not to sound a tone or vibrate when you receive any message. Note: When you receive a type of message you have set not to sound a tone or vibrate, the message notification screen appears as usual. 8 Press A under Done.
Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts. 1 Go to the menu item you want to create a shortcut for.
Shortcuts 2 Scroll to the shortcut you want to use. -orIf you assigned a voice name to the shortcut: Press and hold t. Say the voice name into your phone. The shortcut with that voice name is then highlighted. 3 Press A under Edit. 4 With Key or Voice highlighted, press O to change assignments. Deleting Shortcuts 3 Press O. To delete a shortcut: Editing a Shortcut 1 2 3 4 5 To change the number assigned to a shortcut: 1 2 3 4 5 6 From the main menu, select Shortcuts.
Using a Headset Using a Remote PTT Button If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time: If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls and Private calls. 1 From the main menu, select Settings > Advanced > Headset/Spkr. 2 Select HdsetOnly to send incoming sound to the headset only.
Understanding Status Messages Status Messages Message Description System Busy You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. The system is experiencing heavy traffic. Please try again later. Service Conflict This service cannot be enabled because an incompatible service has already been turned on.
Status Messages Message Description Status Messages Message Description PIN Blocked Call Your Provider The incorrect PIN was entered 3 consecutive times. You will be unable to place or receive calls on your phone. Contact Customer Care to have them obtain the PIN Unblocking Key (PUK) code. No Devices Found No devices were found during your Bluetooth search. Bluetooth Link Is Busy A Bluetooth error occurred. Please try again. Insert SIM Your SIM card is not being detected.
Understanding Status Messages Status Messages Message Description Bluetooth Service Database Error An error with the Bluetooth service database has occurred. Please contact your service provider. Connection Failed! A Bluetooth error has occurred while trying to transfer an object. Object Too Large For Transfer! The object you are trying to transfer is too large. Unsupported Object Type! The object being transferred is of an unsupported type.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
Safety and General Information To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: head in the phone mode or in front of the face in the two-way radio mode, then ensure the antenna and the radio product are kept the following minimum distances from the body when transmitting Phone Operation When placing or receiving a phone call, hold your rad
Portable Radio Product Operation and EME Exposure ALL MODELS WITH FCC ID AZ489FT5838 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Safety and General Information Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.
Operational Warnings Other Medical Devices Operational Warnings If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. For Vehicles with an Air Bag ! Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.
Safety and General Information as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.
Accessory Safety Information Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Accessory Safety Information Important: Save these accessory safety instructions.
Safety and General Information • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. • Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. Accessories as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
MOTOROLA LIMITED WARRANTY What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage. Batteries.
Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: Software NOT Embodied in Physical Media.
MOTOROLA LIMITED WARRANTY THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED.
Limited Warranty Motorola Communication Products (International) Note: This Warranty applies in Singapore and the Philippines. I.
Limited Warranty Motorola Communication Products (International) MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment). f.
Limited Warranty Motorola Communication Products (International) settlement or compromise; and c.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2004 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
Index Numerics 2-way radio 114 see also Private calls, group calls, SDG calls, and call alerts 3-way calling 39 A Accessories 16 safety 135 Airplane mode 113 Antenna 15 Audio recordings 70 playing 70 B Backlight 112, 113 Java applications 112 Battery care 5 charging 3, 4 door 3 inserting 3 safety 134 146 Baud rate 117 Bluetooth 87 access settings 87 access settings, editing 92 accessing 88 and Airplane mode 113 bonds 87, 89 connections, making 89 deleting received items 94 device details 91 device names,
Call Waiting 38 off 38 Calls 3-way 39 answering automatically 114 answering with any key 114 emergency 20 ending 17, 18 entering number 18 from Datebook 108 from memo 53 from recent calls 25 group, see Group calls international 40 making 17 on hold 39 phone calls 17 Private calls 17, 40, 114 receiving 17 redialing 19, 114 remote PTT 125 SDG, see SDG Calls Speed Dial 19 TTY, see TTY calls Turbo Dial 19 voice name 18 Circuit data 43 Clock 114 Contact information receiving 24, 75 Send via PTT 73 sending 73 Co
Index options 8 screen 7 sleep mode 114 Drafts 65 see also MOSMS messages, drafts DRM and gifting 69 and tell-a-friend 69 default location 69 items, in media center 69 java applications 82 DTMF dialing 89, 114 almanac data 100 best results 98 emergency calls 20, 96 map software 102 privacy options 101 security 101 viewing location 97 GPS PIN 116 GPS, see GPS Enabled Group calls 46, 114 making 47 off 47 receiving 47 E H Email 28, 29, 43 Emergency calls 20 End key 1 Handset, see phone Headset 125 Holster
audio recordings 70 deleting 71 forward locked 68 locking 71 memory 72 pictures 69 renaming 71 viewing 67 Memo 53 calling from 53 creating 53 editing 53 storing to Contacts 53 viewing 53 Memory Java applications 83 media center 72 MOSMS messages 66 ring tones 56 voice records 80 Menu key 1, 9 Menus 8 context-sensitive 1, 9 main menu 9 SDG list 48 Message center 59, 61 see also messages MOSMS messages 63 Message notifications 59 setting options 59 Messages 59 see also voice mail, MOSMS messages, and SMS mes
Index Phone 1, 7 active line 114 locking 116 modem 42 off 6 on 6 only 117 setting up 2 Pictures 69 Contacts 27, 28, 29, 32, 69 inserting in messages 69 receiving 73 recent calls 24 Profiles 118 call filtering 121 changing settings 118 creating 120 Datebook 107 deleting 120 editing 120 switching 118 temporary 119 viewing 118 Programming, over-the-air 6 150 PUK code 13 Q Quick notes 64 see also MOSMS messages, Quick notes R Radio frequency 129 Recent calls 23, 25 call alerts 23 contact information 24 creat
starting 50 status icons 10 Security 116 Selective Dynamic Group Calls, see SDG Calls 47 Send key 1 Send via PTT 73 see Pictures, receiving contact information 73 My Info 73 setting for pictures 73 Service provider 16 Service, activating 5 Settings 113 resetting 116 Shortcuts creating 123 deleting 124 editing 124 using 123 SIM card 2, 12, 13 Contacts 27 inserting 14 removing 15 with non-i605 phones 35 SIM PIN 12, 116 changing 12 default 12 entering 12 requirement 13 unblocking 13 SMS messages 59, 62 also s
Index W Waits dialing 40 storing 33 Wallpaper 70, 111 Warranty 141 Word mode 57 152