User's Manual

26
Using the Phone
SIM Card Installation
Before using the HC700-G as a phone, make sure that your
phone is equipped with a SIM (Subscriber Identity Module)
card. SIM card is a small smart card that fits inside the
HC700-G. The SIM card holds the personalized information
about its user including the network activation and even
phone book entries.
To install or replace a SIM card, perform the following steps:
1. Turn off the HC700-G.
2. Remove the battery
3. Open the SIM card door.
4. Slide the SIM card holder forward to unlock the SIM
card.
5. Slide the new SIM card in the holder with the cut corner
on the upper right and the gold plate facing down.
6. Lower the SIM card holder and press downward to lock
the SIM card holder.
7. Close the SIM card door.
8. Install the battery.
9. Perform Cold Reset “Resetting the HC700-G” on
page 20.
Figure 15. SIM Card Installation
SIM Card Door
SIM Card Holder
Enhanced IMD Users.book Page 26 Monday, February 12, 2007 11:46 AM