User's Manual

9
Attaching the hand-strap
The HC700-G has an adjustable hand-strap which enables to
hold the unit for extended periods and provide ease of use.
The strap is made of flexible material with Velcro attachment
patches.
To attach the hand-strap to the back of the HC700-G:
1. Turn the HC700-G to view the back side.
2. Insert the U shaped clip of the strap into the holes on the
imager housing.
3. Attach the end of the strap through the cavity located
next to cradle interface connector.
Figure 6. Attaching the hand-strap
U shaped clip
Hole
Buckle
Hand-strap