User's Manual

13
LED Indications when HC700-G is docked in
the cradle
The Application LED
The Application LED
(see Figure 8) may be
used for any kind of
application notifica-
tion. For example; the
LED may show com-
munication indication
when the application establishes connection with a host
computer or indicate an alert that needs to be handled. For
more information, refer to your software application guide
and the HC700-G Software Development Kit (SDK).
Table 2: Status LED indications when HC700-G is docked in the Cradle
Status Description
Steady red Battery is charging
Steady green Battery is fully charged
Flashing amber 1. Battery temperature is out of range -
battery charging has stopped. Charging
will resume when battery temperature
is within range.
2. Battery Voltage is out of range
(drained battery). The cradle will
attempt to initiate charging for 20 min-
utes and than stop if unsuccessful.
Flashing red/green Charging error/defective battery.
Remove the HC700-G from the cradle
and dock it back again.
If the LED begins to flash red/green,
within 20 minutes, replace the battery.
Figure 8. HC700-G - Application LED
Application LED