User's Manual

Using the Keypad

The HC700-G keypad enables the user to enter both alpha-

betic and numeric data to the software application. However,

since the keypad can only contain a limited number of keys,

some special keys are assigned to perform special tasks that

are usually found on full-size computer keyboards. These are

produced using a combination of the existing keys on the

HC700-G keypad.

Two sets of keys exist on the HC700-G:

1. Keys active when in Alphabetic mode, which are those

seen on the overlay of the HC700-G keypad.

2. Keys active when in Shift or Function mode which are

those seen next to each key on the HC700-G keypad

panel.

Press the

<SHIFT> key to toggle between the Alphabetic and

Numeric keypad modes. Figure 9 shows the HC700-G keypad

and Table 3 describes the HC700-G keys assignment.

Figure 9. HC700-G - Keypad

4-Way Navigation Key

Enter Key

Space Key

Backspace Key

End Key

Escape Key

Shift key (yello

AB/Send Key

Function Key

Main

can/Picture

Button

Application Key