User's Manual

Resetting the HC700-G

You may need to reset the HC700-G; for example, you may

need to reset due to communication cut-off, or if the operat-

ing system or the application stops responding.

If the HC700-G stops responding, perform the steps described

on the following page.

Step 1: Warm

Reset

Important Note: When

the HC700-G performs

Warm Reset, all

recorded information

remains stored in mem-

ory.

Hold down the <ESC>

and <A> and <F> keys

(see Figure 10) for at

least 5 seconds - the Motorola logo will show on the screen

for about 30 seconds and then Windows Mobile desktop or

application screen will appear - the HC700-G functions again.

Warm Reset can also be performed in the following way: go

to: > TaskManager and tap on “Soft Reset”.

If the HC700-G still does

not respond, perform

“Step 2: Cold Reset”:

Step 2: Cold Reset

Cold Reset restarts the

HC700-G by erasing all

stored records and

entries.

Do Not perform Cold

Reset unless Warm

Reset fails to solve the

problem.

Figure 10. Warm Reset - Key Combination

Figure 11. Cold Reset - Key Combination