User's Manual

23
The HC700-G supports 360
° omni-directional capture for easy
use in daily work. The green aiming bar can be positioned at
any angle across the barcode symbol(see Figure 14).
Scanning with Laser aimer imager
To scan a barcode or capture an image, perform the follow-
ing:
1. Run the Bcr barcode reader application:
> Programs > Sample Applications > Bcr.
2. Aim and hold the HC700-G at about 7 inches from the
target.
Press one of the Scan/Picture keys and adjust your position to
place the emitted red pattern at the target.
Red Ambient Light
Aim the green light
bar at the barcode
Scan/Picture Keys
About 7 inches from barcode
± 40 degrees
Scan/Picture Key
Figure 13. Capturing Barcodes with LED Aimer Imager
Figure 14. LED Aimer Imager - Barcode Capture Positions
2D Barcode Symbol
1D Barcode Symbol