User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- List of Processes
- List of Procedures
- About this Guide
- Getting Started with the LEX L10
- 2.1 LEX L10 Features
- 2.2 Unpacking
- 2.3 Setting Up the LEX L10
- 2.3.1 Removing the Screen Protective Film
- 2.3.2 Removing the Battery Cover
- 2.3.3 Installing a microSD or CRYPTR micro Encryption Card
- 2.3.4 Removing the microSD or CRYPTR Card
- 2.3.5 Installing the Public and Private SIM Cards
- 2.3.6 Removing the Public and Private SIM Cards
- 2.3.7 Installing the Battery
- 2.3.8 Removing the Battery
- 2.4 Charging the LEX L10
- 2.5 Powering On the LEX L10 for the First Time
- 2.6 Powering Off the LEX L10
- 2.7 Entering and Exiting the Suspend Mode
- 2.8 Covert Mode
- 2.9 Locking the LEX L10
- 2.10 Setting the Date and Time
- 2.11 Setting the Display
- 2.12 General Sound Setting
- 2.13 Public and Private Carrier Modes
- Using the LEX L10
- Calling
- Radio Remote Control
- Messaging
- Applications
- Wireless
- 8.1 Wireless Wide Area Networks
- 8.2 Wireless Local Area Networks
- 8.3 Bluetooth
- 8.3.1 Adaptive Frequency Hopping
- 8.3.2 Security
- 8.3.3 Bluetooth Profiles
- 8.3.4 Bluetooth Power States
- 8.3.5 Bluetooth Radio Power — Android
- 8.3.6 Discovering Bluetooth Device(s)
- 8.3.7 Changing the Bluetooth Name
- 8.3.8 Connecting to a Bluetooth Device
- 8.3.9 Selecting Profiles on a Bluetooth Device
- 8.3.10 Unpairing a Bluetooth Device
- 8.4 Pairing the LEX L10 with a Radio
- Accessories
- Maintenance & Troubleshooting
- LEX L10 Technical Specifications
Figure 8: Charging the LEX L10
Note: For detailed description, installation and operation of the LEX L10 accessories, refer the quick start
guides provided with each accessory.
2.4.1 Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently controlled by
the LEX L10.
To accomplish this, for small periods of time, the LEX L10 alternately enables and disables battery charging to keep
the battery at acceptable temperatures. The LEX L10 LED indicates when charging is disabled due to abnormal
temperatures by fast blinking amber (once every 2 seconds).
2.4.2 Battery Charge Indications
The Charge and Notification LED is located at the top, front of the LEX L10.
Battery charging and power level is also indicated by a battery icon on the status bar.
Note: Before checking the battery charge level, remove the LEX L10 from any power source (cradle or
USB cable connection).
Figure 9: Charge and Notification LED
Getting Started with the LEX L10 | 33
MN001456A01-A | February 2015 | Send Feedback