User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- List of Processes
- List of Procedures
- About this Guide
- Getting Started with the LEX L10
- 2.1 LEX L10 Features
- 2.2 Unpacking
- 2.3 Setting Up the LEX L10
- 2.3.1 Removing the Screen Protective Film
- 2.3.2 Removing the Battery Cover
- 2.3.3 Installing a microSD or CRYPTR micro Encryption Card
- 2.3.4 Removing the microSD or CRYPTR Card
- 2.3.5 Installing the Public and Private SIM Cards
- 2.3.6 Removing the Public and Private SIM Cards
- 2.3.7 Installing the Battery
- 2.3.8 Removing the Battery
- 2.4 Charging the LEX L10
- 2.5 Powering On the LEX L10 for the First Time
- 2.6 Powering Off the LEX L10
- 2.7 Entering and Exiting the Suspend Mode
- 2.8 Covert Mode
- 2.9 Locking the LEX L10
- 2.10 Setting the Date and Time
- 2.11 Setting the Display
- 2.12 General Sound Setting
- 2.13 Public and Private Carrier Modes
- Using the LEX L10
- Calling
- Radio Remote Control
- Messaging
- Applications
- Wireless
- 8.1 Wireless Wide Area Networks
- 8.2 Wireless Local Area Networks
- 8.3 Bluetooth
- 8.3.1 Adaptive Frequency Hopping
- 8.3.2 Security
- 8.3.3 Bluetooth Profiles
- 8.3.4 Bluetooth Power States
- 8.3.5 Bluetooth Radio Power — Android
- 8.3.6 Discovering Bluetooth Device(s)
- 8.3.7 Changing the Bluetooth Name
- 8.3.8 Connecting to a Bluetooth Device
- 8.3.9 Selecting Profiles on a Bluetooth Device
- 8.3.10 Unpairing a Bluetooth Device
- 8.4 Pairing the LEX L10 with a Radio
- Accessories
- Maintenance & Troubleshooting
- LEX L10 Technical Specifications
Figure 30: Available/Busy Status Selection
2 Tap Available or Busy.
Status is immediately set to the selected state.
3.3.2.2 Moving Widgets
When and where to use: There is a need to move a widget to another location.
Procedure:
1 Navigate to the Home screen panel where the widget is located.
2 Touch and hold the widget; then, slide the widget to a new location.
If you want to move the widget to another panel, slide the widget left or right to that panel; then slide the widget to
a location in the panel.
3.3.2.3 Removing Widgets
When and where to use: There is a need to remove a widget from a Home screen panel.
Procedure:
1 Slide the Home screen panel until you locate the panel that holds the widget that you want to remove.
2 Touch and hold the widget while sliding it down to the bottom of the panel.
X Remove appears near the bottom of the screen.
3 Slide the widget to X Remove until the widget turns red; then, release the widget.
The widget is removed from the panel.
Note: The widget is only removed from the panel. It is not deleted from the LEX L10.
58 | Using the LEX L10
Send Feedback | February 2015 | MN001456A01-A