User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- List of Processes
- List of Procedures
- About this Guide
- Getting Started with the LEX L10
- 2.1 LEX L10 Features
- 2.2 Unpacking
- 2.3 Setting Up the LEX L10
- 2.3.1 Removing the Screen Protective Film
- 2.3.2 Removing the Battery Cover
- 2.3.3 Installing a microSD or CRYPTR micro Encryption Card
- 2.3.4 Removing the microSD or CRYPTR Card
- 2.3.5 Installing the Public and Private SIM Cards
- 2.3.6 Removing the Public and Private SIM Cards
- 2.3.7 Installing the Battery
- 2.3.8 Removing the Battery
- 2.4 Charging the LEX L10
- 2.5 Powering On the LEX L10 for the First Time
- 2.6 Powering Off the LEX L10
- 2.7 Entering and Exiting the Suspend Mode
- 2.8 Covert Mode
- 2.9 Locking the LEX L10
- 2.10 Setting the Date and Time
- 2.11 Setting the Display
- 2.12 General Sound Setting
- 2.13 Public and Private Carrier Modes
- Using the LEX L10
- Calling
- Radio Remote Control
- Messaging
- Applications
- Wireless
- 8.1 Wireless Wide Area Networks
- 8.2 Wireless Local Area Networks
- 8.3 Bluetooth
- 8.3.1 Adaptive Frequency Hopping
- 8.3.2 Security
- 8.3.3 Bluetooth Profiles
- 8.3.4 Bluetooth Power States
- 8.3.5 Bluetooth Radio Power — Android
- 8.3.6 Discovering Bluetooth Device(s)
- 8.3.7 Changing the Bluetooth Name
- 8.3.8 Connecting to a Bluetooth Device
- 8.3.9 Selecting Profiles on a Bluetooth Device
- 8.3.10 Unpairing a Bluetooth Device
- 8.4 Pairing the LEX L10 with a Radio
- Accessories
- Maintenance & Troubleshooting
- LEX L10 Technical Specifications
- Quick Responses - Tap to edit quick responses to use instead of answering a call.
- Fixed Dialing Numbers — Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area
code(s) specified in a Fixed Dialing list.
- TTY mode — Tap to set the TTY setting. Use an optional teletypewriter (TTY) device with the LEX L10 to
send and receive calls. Plug the TTY device into the LEX L10 headset jack and set the LEX L10 to operate in
one of the TTY modes.
Note: Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY
device to the LEX L10.
Set the LEX L10 volume to a middle level setting for proper operation. If you experience a high
number of incorrect characters, adjust the volume as needed to minimize the error rate.
For optimal performance, the LEX L10 should be at least 30 cm (12 inches) from the TTY device.
Placing the LEX L10 too close to the TTY device may cause high error rates.
+ TTY Off (default) — TTY is off.
+ TTY Full — Transmit and receive TTY characters.
+ TTY HCO — Transmit TTY characters but receive by listening to earpiece.
+ TTY VCO — Receive TTY characters but transmit by speaking into microphone.
-
DTMF tones — Set the length of the DTMF tones. Available options are : Normal or Long.
- CDMA Call Settings:
+ Voice privacy — Enable enhanced privacy mode.
• Internet Call Settings
- SIP Accounts — Choose to receive Internet calls for accounts added to the device, view or change SIP
accounts, or add an Internet calling account.
- Use Internet Calling — Use Internet calling for all calls, only for calls to Internet calling addresses (the
default setting), or to ask for each call. Must be connected to a WiFi network and have added an Internet
calling account to the device to use Internet calling.
- IMS Account — Enable/Disable IMS Service Capability.
Calling | 77
MN001456A01-A | February 2015 |
Send Feedback