User's Manual

Figure 80: USB Cable Connection to Host Computer
A USB icon appears at the top of the screen, and the notification Connected as a media
device appears briefly at the top of the screen.
2 Tap .
3 Tap
.
4 Tap More ... .
5 Tap Tethering & portable hotspot.
6 Check USB tethering.
The host computer is now sharing the LEX L10ig data connection.
Postrequisites: To stop sharing the data connection, uncheck USB tethering or disconnect the USB
cable.
NOTICE: The USB cover needs to be fully seated after use.
Configuring Bluetooth Tethering
Prerequisites: Configure the host computer to obtain its network connection using Bluetooth. For
more information, see the host computer’s documentation.
When and where to use: Use this procedure to tether Bluetooth to share the data connection with a
host computer.
Procedure:
1 Pair the LEX L10ig with the host computer.
2 Tap
.
3 Tap
.
4 Tap More ... .
5 Tap Tethering & portable hotspot.
MN002859A01-A
Chapter 8: Wireless
124 Send Feedback