User's Manual

Entering and Exiting the Suspend Mode
Suspend mode (also known as sleep mode) is a low-power mode of operation that helps reduce
electrical power consumption by shutting down parts of the LEX L10ig that are not in use. The LEX
L10ig goes into Suspend mode when the Power button is pressed or after a time out period of
inactivity.
When and where to use: Use this procedure to enter and exit Suspend mode:
Procedure:
1 To enter Suspend mode, press and release the Power button.
The LEX L10ig screen turns off.
NOTICE: In Suspend mode, the following items continue to operate:
• Power button
• PTT Button (if set to be used)
• Notification LEDs
• Wireless communication.
2 To exit Suspend mode, press and release the Power button.
Setting Time Out to Enter Suspend Mode
When and where to use: Use this procedure to set the period of inactivity before suspend mode
occurs.
Procedure:
1 From the Home screen, tap:
→ → Display → Sleep.
2 Select the inactivity duration before Suspend mode becomes active.
3 Tap
.
Covert Mode
In the Covert Mode, the LEX L10ig goes dark and quiet. All visible and audible LEX L10ig alerts and
notifications are shut down. This feature makes the LEX L10ig effectively unnoticeable even in a silent
and dark environment.
In Covert Mode, the following sounds, visual indications, and keys of the LEX L10ig are disabled:
• Display brightness
• Touchscreen
• Keylight
• LED indications
• Vibration
• Speaker audio
NOTICE: In Covert Mode, sound is routed to a Bluetooth headset, if connected or sound is
routed to a wired earpiece, if connected. Alternatively, sound is routed to the LEX L10ig
earpiece.
• Tone indications
MN002859A01-A
Chapter 2: Getting Started
46 Send Feedback