LEX L10i Mission Critical Handheld User Guide JANUARY 2016 © 2016 Motorola Solutions, Inc.
MN002347A01-A Copyrights Copyrights The Motorola products described in this document may include copyrighted Motorola computer programs. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola.
This page intentionally left blank.
MN002347A01-A Contact Us Contact Us Motorola Solution Support Center The Solution Support Center (SSC) is the primary Motorola Solutions support contact. Call: • Before any software reload. • To confirm troubleshooting results and analysis before removing and replacing a Field Replaceable Unit (FRU) and Field Replaceable Entity (FRE) to repair the system. For...
MN002347A01-A Contact Us Latest Manual Versions You can verify the latest version of this manual at https://businessonline.motorolasolutions.com.
MN002347A01-A Document History Document History Version Description Date MN002347A01A Initial release of the LEX L10i Mission Critical Handheld User Guide.
This page intentionally left blank.
MN002347A01-A Contents Contents Copyrights................................................................................................................... 3 Contact Us................................................................................................................... 5 Document History....................................................................................................... 7 List of Figures......................................................................................
MN002347A01-A Contents Monitor Battery Usage........................................................................................... 40 Low Battery Notification......................................................................................... 41 Battery Optimization...............................................................................................41 Powering On the LEX L10i for the First Time..............................................................................
MN002347A01-A Contents Home Screen Overlay............................................................................................61 Customizing the Home Screen......................................................................................... 61 Adding Widgets...................................................................................................... 61 Moving Widgets......................................................................................................
MN002347A01-A Contents Taking Photos................................................................................................................. 102 Taking a Panoramic Photo..............................................................................................104 Recording Videos............................................................................................................105 Camera Settings............................................................................................
MN002347A01-A Contents Adding a Virtual Private Network (VPN)......................................................................... 126 Cell Broadcasts...............................................................................................................127 Wireless Local Area Networks...................................................................................................128 Scanning and Connecting to a Wi-Fi Network................................................................
MN002347A01-A Contents Backing up Contacts....................................................................................................... 155 Resetting the LEX L10i.............................................................................................................. 157 Performing Factory Data Reset...................................................................................... 157 Chapter 12: Technical Specifications...................................................................
MN002347A01-A List of Figures List of Figures Figure 1: Manufacturing Label................................................................................................................28 Figure 2: LEX L10i Features...................................................................................................................31 Figure 3: Removing the Screen Protective Film..................................................................................... 34 Figure 4: Removing the Battery Cover......
MN002347A01-A List of Figures Figure 37: Named Folder........................................................................................................................76 Figure 38: Notifications Screen.............................................................................................................. 77 Figure 39: MTP / PTP Selection Screen.................................................................................................78 Figure 40: Insert Wired Headset Plug.................
MN002347A01-A List of Figures Figure 76: Start Recording................................................................................................................... 117 Figure 77: Record Your Message.........................................................................................................118 Figure 78: Finish Recording................................................................................................................. 118 Figure 79: Voice Dialer Window.....................
This page intentionally left blank.
MN002347A01-A List of Tables List of Tables Table 1: LEX L10i Features....................................................................................................................31 Table 2: Charge and Notification LED — Charging Indications..............................................................38 Table 3: Using the Touchscreen.............................................................................................................57 Table 4: Android Keyboard Settings......................
This page intentionally left blank.
MN002347A01-A List of Procedures List of Procedures Removing the Battery Cover ................................................................................................................. 34 Installing a microSD or CRYPTR micro Encryption Card ...................................................................... 35 Removing the microSD or CRYPTR Card .............................................................................................35 Installing the Public and Private SIM Cards ............
MN002347A01-A List of Procedures Naming Folders ..................................................................................................................................... 76 Removing a Folder ................................................................................................................................ 76 Accessing Files from a Computer ..........................................................................................................77 Making a Call Using the Dialer ....
MN002347A01-A List of Procedures Setting Auto-Sync ................................................................................................................................125 Disabling Data When Roaming ........................................................................................................... 125 Limiting Data Connection to a Network ............................................................................................... 126 Editing the Access Point Name ....................
This page intentionally left blank.
MN002347A01-A About this Guide Chapter 1 About this Guide This guide provides information about using the LEX L10i Mission Critical Handheld and accessories. NOTICE: Screens and menu options may be changed or customized by your agency to show different information. Contact Us The Solution Support Center (SSC) is the primary Motorola Solutions support contact. Motorola Solution Support Center Call the SSC: • Before any software reload.
MN002347A01-A Chapter 1: About this Guide We welcome your feedback on this and other Motorola manuals. To take a short, confidential survey on Motorola Customer Documentation, go to docsurvey.motorolasolutions.com or scan the following QR code with your mobile device to access the survey. Versions This guide covers various software configurations and references are made to operating system or software versions discussed in the following three subsections.
MN002347A01-A Chapter 1: About this Guide • Wireless on page 121 Chapter 8, explains configuring the LEX L10i to operate on a personal, local, and wide area wireless network. • ADB and USB Driver Setup on page 139 Chapter 9, is a reference to setting up the Android Debug Bridge (ADB) and USB driver for your Windows PC. • Accessories on page 145 Chapter 10, is a reference to available accessories and how to use them with the LEX L10i.
MN002347A01-A Chapter 1: About this Guide NOTICE: NOTICE contains information more important than the surrounding text, such as exceptions or preconditions. They also refer the reader elsewhere for additional information, remind the reader how to complete an action (when it is not part of the current procedure, for instance), or tell the reader where something is located on the screen. There is no warning level associated with a note.
MN002347A01-A Chapter 1: About this Guide used. Shipping the units improperly can possibly void the warranty. Remove the CRYPTR card or microSD card and SIM card before shipping. If you purchased your product from a Motorola Solutions business partner, contact that business partner for support. Documentation Set The documentation set for the LEX L10i provides information for specific user needs.
This page intentionally left blank.
MN002347A01-A Getting Started Chapter 2 Getting Started Use the information in this chapter to help you get started using the LEX L10i. Features The LEX L10i features are shown in the following figure and summarized in the following table. Figure 2: LEX L10i Features Table 1: LEX L10i Features Item Function Charge/Notification LED Solid Blue: New notification (New Voice mail, New Text messages, Missed Calls, Android App Notifications, and so on) Off: Battery is not charging.
MN002347A01-A Chapter 2: Getting Started Item Function Home key – Displays the Home screen with a single tap. Back key – Displays the previous screen. Closes the keyboard if the on-screen keyboard is open. External Speakers Use for communications in handset mode. Provides audio output for video and voice playback in speakerphone mode. Menu key – At any screen or application, press to see available options. 3.5 mm Headset Port Connects to headsets (3.5 mm plug). NOTICE: Do not use 2.5 mm to 3.
MN002347A01-A Chapter 2: Getting Started Item Function Earpiece Provides audio in handset mode. External Charging Contacts Provides power to the device from cradles. Battery Cover Removal Slot Assists in battery cover removal to provide access to the battery, SIM, CRYPTR, and microSD card holders. microUSB Port Provides USB client and host communications. Rear Camera and Flash Takes photos and video, and provides flash illumination for the camera.
MN002347A01-A Chapter 2: Getting Started Removing the Screen Protective Film The LEX L10i is provided with a screen protective film that protects the device during shipping. To enable proper operation of the LEX L10i, the screen protector must be removed before use. Figure 3: Removing the Screen Protective Film Removing the Battery Cover This procedure explains how to remove the battery cover. Procedure: 1 Hold the LEX L10i firmly as shown.
MN002347A01-A Chapter 2: Getting Started Installing a microSD or CRYPTR micro Encryption Card The LEX L10i card holder can support either a microSD card or a CRYPTR micro encryption card. The microSD card is a removable flash memory used for storing media on the LEX L10i. The LEX L10i can support microSD cards with up to 64GB memory space. The CRYPTR micro encryption card is used for voice encryption in features such as data and phone over Virtual Private Network (VPN) and Pushto-Talk (PTT) communication.
MN002347A01-A Chapter 2: Getting Started Installing the Public and Private SIM Cards Public and private phone services require a Subscriber Identification Module (SIM) card. Prerequisites: The SIM card can contain the following information: • Mobile phone service provider account details. • Information regarding service access and preferences. • Contact information, which can be moved to the People application on the LEX L10i. • Any additional subscribed services.
MN002347A01-A Chapter 2: Getting Started 5 Slide the battery latch to Unlock position. 6 Lift the battery out of the LEX L10i. 7 Push the SIM card to release it from the holder. 8 Remove the SIM card. 9 Place the battery back into the LEX L10i. 10 Snap the battery cover back into place. Installing the Battery When and where to use: Perform this procedure to install a battery. Procedure: 1 Remove the battery from the packaging.
MN002347A01-A Chapter 2: Getting Started Figure 8: Charging the LEX L10i NOTICE: Keep the USB cover closed when USB not in use. NOTICE: For detailed description, installation and operation of the LEX L10i accessories, refer the quick start guides provided with each accessory. Charging Temperature Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently controlled by the LEX L10i.
MN002347A01-A Chapter 2: Getting Started Status Indications • Device is not inserted correctly in the cradle • Device is not connected to a USB cable • Charger or cradle is not powered Slowly blinking red (once every 2 seconds) Battery power is extremely low (less than 10% power left). Solid red LEX L10i is charging. Fast blinking red (once every 0.
MN002347A01-A Chapter 2: Getting Started Monitor Battery Usage The Battery screen lists which applications consume the most battery power. Also use it to turn off applications that were downloaded if they are consuming too much power. To monitor battery usage, tap → → Battery. Figure 10: Battery Screen The Battery screen lists the applications using the battery.
MN002347A01-A Chapter 2: Getting Started Low Battery Notification When the battery charge level drops below 20%, the LEX L10i displays a notice to connect the LEX L10i to power. The user should charge the battery using one of the charging accessories. Figure 11: Low Battery Notification When the battery charge drops below 10%, the LEX L10i displays a notice to connect the LEX L10i to power. The user must charge the battery using one of the charging accessories.
MN002347A01-A Chapter 2: Getting Started • Charge the LEX L10i when not in use. • Set the screen to Suspend (Sleep) after a short period of non-use. • Reduce screen brightness. • Minimize use of applications that keep the LEX L10i from suspending, for example, music or video applications. Turning Off the Radio When and where to use: Use this procedure to turn off the LEX L10i radios. Procedure: 1 Press the Power button until the Quick Settings menu appears.
MN002347A01-A Chapter 2: Getting Started Powering On the LEX L10i for the First Time Press the Power button to turn on the LEX L10i. The device boot screen displays as the LEX L10i boots. Figure 14: LEX L10i Boot Screen Powering Off the LEX L10i When and where to use: Use this procedure to power off the LEX L10i. Procedure: 1 Press and hold the Power button until the Power Button menu appears. Figure 15: Selecting Power Off 2 Tap Power off and then OK.
MN002347A01-A Chapter 2: Getting Started Entering and Exiting the Suspend Mode Suspend mode (also known as sleep mode) is a low-power mode of operation that helps reduce electrical power consumption by shutting down parts of the LEX L10i that are not in use. The LEX L10i goes into Suspend mode when the Power button is pressed or after a time out period of inactivity.
MN002347A01-A Chapter 2: Getting Started NOTICE: In Covert Mode, the following features remain active: - Power button - PTT button - Volume button - Four front panel keys - Camera button - Audio or tone indications are available using a wired headset (through headset port) or a Bluetooth headset Turning On Covert Mode When and where to use: Use this procedure to turn on Covert Mode. Procedure: 1 Press and hold the Power button for at least two seconds.
MN002347A01-A Chapter 2: Getting Started Figure 17: Power Button Menu 2 Tap Covert mode. The Home screen appears. Locking the LEX L10i The lock screen automatically displays after predefined time out to prevent unauthorized people from using the device. The device does not lock at the same time as it is suspended. The device can also be locked manually by the user to disable unwanted key presses or screen tap or to keep data secured. To manually lock the device, press and release the Power button.
MN002347A01-A Chapter 2: Getting Started Postrequisites: Specify a pattern as described in Specifying a Pattern on page 47 Specify a pin, or password as described in Specifying a PIN or Password on page 47. Then, specify a timeout value as described in Setting the Timeout for Locking the LEX L10i on page 47. Specifying a Pattern Prerequisites: The Pattern option must be selected for Screen lock. When and where to use: Use this procedure to specify a pattern to unlock your LEX L10i. Procedure: 1 Tap . .
MN002347A01-A Chapter 2: Getting Started When and where to use: Use this procedure to set the timeout value to lock the LEX L10i. Procedure: 1 Tap 2 Tap . . 3 Tap Security. 4 Tap Automatically lock. A list of timeout values is displayed. 5 Select a timeout value from the list. 6 The Security screen is re-displayed. Unlocking the LEX L10i When the LEX L10i is not used for a period of time and the user tries to access the device, the Lock screen displays.
MN002347A01-A Chapter 2: Getting Started Calling Emergency from a Locked LEX L10i You can make an emergency call even when the LEX L10i is locked and you do not remember the PIN. When and where to use: Use this procedure to make an emergency call when the device is locked and you do not remember the PIN: Procedure: 1 Tap EMERGENCY CALL at the bottom of the lock screen. The Emergency Dialer screen displays. 2 Enter the emergency number. 3 Tap .
MN002347A01-A Chapter 2: Getting Started • Font size — Change the font size for display text. • Cast screen — Enable the device to project the screen to a TV or other device. Setting Screen Brightness When and where to use: Use this procedure to set the screen brightness. Procedure: 1 Tap . . 2 Tap 3 Tap Display. 4 Tap Brightness. 5 Tap Automatic brightness to set the device to automatically adjust the brightness using the built-in light sensor. Use the slider to set a brightness level. 6 Tap .
MN002347A01-A Chapter 2: Getting Started 5 Select one of the sleep values: • 15 seconds • 30 seconds (default) • 1 minutes • 2 minutes • 5 minutes • 10 minutes • 30 minutes . 6 Tap Setting Up Daydream When and where to use: The Daydream application behaves as a screensaver when the LEX L10i is docked inside a cradle and/or in sleep mode. Use this procedure to set up a screensaver. Procedure: 1 From the Home screen, tap 2 Tap . . 3 Tap Display. 4 Tap Daydream.
MN002347A01-A Chapter 2: Getting Started 6 Press . Enabling Cast Screen When and where to use: Use this procedure to enable the LEX L10i to project the its screen to a TV or other device. Procedure: . 1 From the Home screen, tap 2 Tap . 3 Tap Display. 4 Tap Cast screen. 5 Tap . 6 Select Enable wireless display. Projecting the LEX L10i Screen on Another Device Prerequisites: The Cast screen must be enabled. When and where to use: Use this procedure to project the LEX L10i screen on another device.
MN002347A01-A Chapter 2: Getting Started Figure 18: Sound Screen • Volumes – Use to change the volume of media, ringtones, notifications, and alarms. • Call Ringtone and Vibrate - Phone ringtone — Tap to select a ringtone to sound when an incoming call is received. - Vibrate when ringing — Check to make the device vibrate when a call is received. NOTICE: Setting volume can also be done by pressing the Volume button, up and down, during a call, or while playing music or a video.
MN002347A01-A Chapter 2: Getting Started - Screen lock sounds — Check to play a sound when locking and unlocking the screen. - Vibrate on tap — Check to have the device vibrate when touching soft keys and on certain screen interactions. - Emergency tone — Select and check Alert to play a tone or Vibrate when an emergency notification is received. Select Off to disable emergency notification. Public and Private Carrier Modes The LEX L10i operates on both public and private carriers.
MN002347A01-A Chapter 2: Getting Started Figure 20: Service Switch The current carrier mode is indicated under the Service switch option. 2 Tap Service switch. A confirmation popup is displayed. Figure 21: Switch Networks Confirmation Popup 3 Tap Switch. Switching Modes Using the Settings App When the LEX L10i is equipped with Private and Public SIM cards, the Settings application can be used to switch modes. Prerequisites: The LEX L10i is equipped with Private and Public enabled SIM cards.
MN002347A01-A Chapter 2: Getting Started Figure 22: Switch Networks Confirmation Popup 7 Tap Switch. LEX L10i Emergency Button The LEX L10i includes an Emergency Button which aids responders during emergencies. This feature helps reduce response times in an emergency situation. The device must be pre-configured based on the responder’s specific requirements before it is given to a user.
MN002347A01-A Using the LEX L10i Chapter 3 Using the LEX L10i This chapter explains the indicators, buttons, status icons, and controls on the LEX L10i. This chapter also provides basic instructions for using the device. Using the Touchscreen The multi-tap sensitive screen is used to operate the LEX L10i.
MN002347A01-A Chapter 3: Using the LEX L10i Using the On-Screen Keyboard The on-screen keyboard is used to enter text in a text field. To configure the keyboard settings, tap and hold select Android Keyboard Settings. (comma key) > slide your finger up to and then Figure 23: Android Keyboard Settings A description of the settings can be found in Android Keyboard Settings on page 59. Editing Text Edit entered text and use menu commands to cut, copy, and paste text within or across applications.
MN002347A01-A Chapter 3: Using the LEX L10i • A larger version of the key displays briefly over the keyboard. • Keys with alternate characters display an ellipsis ( ... ) below the character. Android Keyboard Settings The Android Keyboard Settings may be personalized to meet your preferences. Table 4: Android Keyboard Settings Setting Description GENERAL Input Languages Selects the language used in the keyboard. Auto-capitalization Automatically capitalize the first letter after a period.
MN002347A01-A Chapter 3: Using the LEX L10i Motorola Solutions Home Experience (MHx) The Motorola Solutions Home Experience (MHx) is the engine that drives the user interface of the LEX L10i. Specifically, MHx provides a unique experience for customizing the LEX L10i Home screen. LEX L10i Home Screen The Home screen displays after the LEX L10i turns on and unlocks. Figure 24: Default Home Screen The Home screen is completely customizable depending on the specifications for your agency.
MN002347A01-A Chapter 3: Using the LEX L10i - Other shortcuts determined by your agency • Calendar Widget • email Widget • Messaging Widget • Search Widget • My Apps Widget • Other Widgets determined by your agency • Home Screen Overlay — Provides quick access to core functions. The Home screen provides four screens for placement of widgets and shortcuts. Swipe the screen left or right to view the additional screens.
MN002347A01-A Chapter 3: Using the LEX L10i Figure 25: Widgets Screen NOTICE: To identify Motorola Solutions Widgets, their names are preceded by MHx. 4 The Widgets screen contains multiple panels. Swipe the Widgets screen left or right to locate the widget that you want to add. 5 Touch and hold the widget; then, slide the widget down the screen and place it in the current panel.
MN002347A01-A Chapter 3: Using the LEX L10i Figure 26: Example of a Widget Added to New Panel NOTICE: Some widgets are re-sizable as soon as you place it in a panel. Press and hold the widget. If the re-size tool displays (four dots, one on each side of the widget), you can re-size the widget by dragging the dots on the re-size tool. Adding Shortcuts to the My Apps Widget The My Apps widget is a special MHx widget where you can add shortcuts for quick access.
MN002347A01-A Chapter 3: Using the LEX L10i Figure 27: Empty My Apps Widget 2 Tap the My Apps widget to add shortcuts to it. A screen with a list of shortcuts is displayed.
MN002347A01-A Chapter 3: Using the LEX L10i Figure 28: List of Shortcuts for My Apps Widgets 3 Select each shortcut that you want to add to the My Apps widget. You may add up to five shortcuts. 4 Tap Done. Shortcuts are added to the My Apps widget.
MN002347A01-A Chapter 3: Using the LEX L10i Figure 29: My Apps Widget with Shortcuts Added Changing My Status When and where to use: Perform this procedure to set the status of the LEX L10i user to either Available or Busy. No matter what the status is set to, calls are still received. This status is shown to other users. NOTICE: The My Status widget must be added before it is visible in the Home screen.
MN002347A01-A Chapter 3: Using the LEX L10i 2 Tap one of the status states. Status is immediately set to the selected state. Moving Widgets When and where to use: Use this procedure to move (relocate) widgets on the Home screen. Procedure: 1 Navigate to the Home screen panel where the widget is located. 2 Touch and hold the widget; then, slide the widget to a new location.
MN002347A01-A Chapter 3: Using the LEX L10i Example of a Customized Home Screen Panel This topic shows you an example of a customized Home screen panel. Figure 32: Example of a Customized Home Screen Panel The above figure shows a customized Home screen panel with the following widgets: • My Status • Two Direct dial widgets • Calendar • My Apps Status Bar The Status bar displays the time, notification icons (left side) and status icons (right side).
MN002347A01-A Chapter 3: Using the LEX L10i Notification Icons Notification icons alert you when a notification has been received. Table 5: Notification Icons Icon Description Indicates that more notifications are available for viewing. Indicates that data is syncing. Indicates an incoming email. Converged Services notification. This icon has four parts: location services (top left), radio services (top right), priority manager (bottom left), and presence service (bottom right).
MN002347A01-A Chapter 3: Using the LEX L10i Icon Description Indicates the microSD card is almost full. Indicates the device is downloading data when animated and download is complete when static. Indicates the device is connected via USB cable. Indicates the device is connected to or disconnected from virtual private network (VPN). Preparing SD card. Indicates no SIM is installed. Indicates the USB debugging is enabled on the LEX L10i. Indicates the device has received a text message.
MN002347A01-A Chapter 3: Using the LEX L10i Icon Description Indicates all sounds except media and alarms are silenced and vibrate mode is active. Indicates the ringer is silenced. Microphone is muted during a call. Indicates the battery is fully charged. Indicates the battery is partially drained. Indicates the battery charge is low. Indicates the battery charge is very low. Indicates the battery charge is low. Indicates the battery is charging. Indicates the Airplane Mode is active.
MN002347A01-A Chapter 3: Using the LEX L10i To open the Notification panel drag the Status bar down from the top of the screen. Figure 34: Notification Panel To respond to a notification, open the Notifications panel and then tap a notification. The Notifications panel closes and the subsequent activity is dependent on the notification. To clear all notifications, open the Notifications panel and tap removed. Ongoing notifications remain in the list. .
MN002347A01-A Chapter 3: Using the LEX L10i The Busy status indicates that the LEX L10i user is busy but the LEX L10i is still able to send and receive calls. Status of Contacts The status of LEX L10i contacts is shown in all of the Contacts screens, and People list. The status of a contact can be: • Offline • Available • Busy If the contact is not connected to and registered with a system server, the status shown is Offline.
MN002347A01-A Chapter 3: Using the LEX L10i • Settings — Opens the Settings screen. • Wi-Fi — Displays the current Wi-Fi connection. Tap to open the Wi-Fi settings screen. • Service — Displays the current cellular service used; public or Private. • Battery Status — Displays the current battery charge level. Tap to open the Battery screen. • Airplane Mode — Displays the Airplane mode status. Tap to toggle Airplane mode on and off. Turn on Airplane mode to turn off all the radios.
MN002347A01-A Chapter 3: Using the LEX L10i Icon Description Motorola Device Management — Enables staging and management of the device for initial use by initiating the deployment of settings, firmware, and software from a server. For more information, see the LEX 10i Service Provisioning Guide. Motorola TechDocs — Use to view device ondevice documentation. MVPN — Enables the Motorola Solutions Mobile VPN (MVPN). Movie Studio — Use to combine existing videos. Music — Access music stored on the device.
MN002347A01-A Chapter 3: Using the LEX L10i Folders Use Folders to organize similar applications together. Tap the folder to open and display items in the folder. Creating a Folder When and where to use: Use a procedure to create a folder on the Home screen. NOTICE: There must be a minimum of two app icons to create a folder. Procedure: 1 Go to the desired Home screen. 2 Tap and hold on one application icon. 3 Drag the icon and stack on top of another icon. 4 Lift and release.
MN002347A01-A Chapter 3: Using the LEX L10i 2 Drag the folder to X Remove until the folder turns red; then release. The folder is removed from the screen. Accessing Files from a Computer When and where to use: Use this procedure to allow access to files from your computer using MTP (media device) or using PTP (camera software). Procedure: 1 Connect the device to your computer using a USB cable.
MN002347A01-A Chapter 3: Using the LEX L10i Figure 39: MTP / PTP Selection Screen 4 Select Media device (MTP) to access media files from a Windows computer or Camera (PTP) to access photos / files on a computer that does not support MTP. 5 Tap 78 to return to the previous screen.
MN002347A01-A Calling Chapter 4 Calling Make a phone call from the Phone application, the People application, or other applications or widgets that display contact information. Push-To-Talk (PTT) Calling The handheld must be provisioned for PTT services on a Motorola Solutions PTT server. To make PTT calls and how to receive PTT calls on the LEX 10i, see Push-To-Talk for LEX L10i manual.
MN002347A01-A Chapter 4: Calling Lift the headset cover and insert the headset plug. To end a call using the wired headset, press and hold the headset button until the call ends. Figure 40: Insert Wired Headset Plug NOTICE: The headset cover must be properly seated after removing the headset plug. Adjusting Audio Volume Use the Volume buttons to adjust the volume of the ringer when not in a call and the audio volume when in a call. NOTICE: Adjust the conversation phone volume during a call.
MN002347A01-A Chapter 4: Calling Figure 41: Dialer Screen 2 Tap the tab above the dialer. 3 Tap the keys to enter the phone number. 4 Tap Send Feedback below the dialer to initiate the call.
MN002347A01-A Chapter 4: Calling Figure 42: Call in Progress If... Then... You want to display the dialer. Tap You want to turn on the speakerphone. Tap . You want to mute the call. Tap . You want to add another person to the call. Tap 5 Tap . . to end the call. Making a Call Using People List Contacts When and where to use: Use this procedure to make a call using people list contacts to initiate a call. Procedure: 1 On the Home screen, tap 2 Tap the . tab.
MN002347A01-A Chapter 4: Calling Figure 43: People List Contact 4 Tap the phone number next to the contact to initiate the call. 5 Tap to end the call. Making a Call Using Call History When and where to use: Use this procedure to make a call using call history. Call History is a list of all the calls placed, received, or missed. It provides a convenient way to redial a number, return a call, or add a number to Contacts. Procedure: 1 On the Home screen, tap 2 Tap the Send Feedback . tab.
MN002347A01-A Chapter 4: Calling Figure 44: Call History Tab 3 Tap 4 Tap next to the contact to initiate the call. to end the call. Example: Arrow icons beside a call indicate the type of call. Multiple arrows indicate multiple calls: • — Missed incoming call • — Received incoming call • — Outgoing call Making a Conference Call When and where to use: Conference calling is available if you have two or more people you wish to have a conversation with at the same time.
MN002347A01-A Chapter 4: Calling 4 Tap below the dialer to initiate the call. 5 When the call connects, tap . The first call is placed on hold. 6 Tap the keys to enter the second phone number. 7 Tap below the dialer to initiate the call. 8 When the call connects, the first call is placed on hold and the second call is active.
MN002347A01-A Chapter 4: Calling Figure 46: Two Calls Connected 9 Tap to create a conference call with three people. Figure 47: Merged Calls 10 Tap to add another call. The conference is placed on hold.
MN002347A01-A Chapter 4: Calling 11 Tap the keys to enter the second phone number. 12 Tap below the dialer to initiate the call. 13 Tap to add the third call to the conference. 14 Tap to rotate between the individual calls. Calls are rotated starting with the first call. This allows you to speak privately to one party. Tap to rotate to the next party. When the rotation is complete, you are placed back into conference mode and all calls are active.
MN002347A01-A Chapter 4: Calling - Fixed Dialing Numbers — Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area code(s) specified in a Fixed Dialing list. - TTY mode — Tap to set the TTY setting. Use an optional teletypewriter (TTY) device with the LEX L10i to send and receive calls. Plug the TTY device into the LEX L10i headset jack and set the device to operate in one of the TTY modes.
MN002347A01-A Chapter 4: Calling Figure 48: Emergency Alert Activation Popup Send Feedback 89
This page intentionally left blank.
MN002347A01-A Radio Services Chapter 5 Radio Services Radio Services for LEX 10i The Radio Services is a free application available on the device and enables a LEX L10i to connect with a Motorola Operations Critical Wireless (OCW) Push-to-talk Pod (NNTN8127) and Bluetoothenabled device (accessory) through a wireless Bluetooth connection. Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.
MN002347A01-A Chapter 5: Radio Services Figure 49: Bluetooth Pairing Screen 4 From the Bluetooth screen, in the AVAILABLE DEVICES section, tap an unconnected Bluetooth-enabled device (accessory). Figure 50: Bluetooth Device Screen 5 In the PAIRED DEVICES section, the Bluetooth-enabled device is connected.
MN002347A01-A Chapter 5: Radio Services Figure 51: Bluetooth Paired Devices Screen NOTICE: Your Bluetooth-enabled device (accessory) may require additional steps to complete the pairing. Refer to respective Bluetooth-enabled device (accessory) user manual. Unpairing LEX L10i from Bluetooth Accessory Prerequisites: The LEX L10i is unpaired with Bluetooth-enabled device (accessory). When and where to use: Use this procedure to unpair the LEX L10i from a Bluetooth-enabled device (accessory).
MN002347A01-A Chapter 5: Radio Services Figure 52: Bluetooth Paired Devices 5 Tap Unpair.
MN002347A01-A Messaging Chapter 6 Messaging Use Messaging to send and receive SMS and MMS messages. From Home or All Apps screen, tap . Sending a Text Message When and where to use: Use this procedure to send text messages. Procedure: 1 In the main Messaging screen, tap . The New Message screen displays. Figure 54: New Message Screen 2 In the To field, enter a name or a mobile phone number. 3 In the Type message field, enter the text message. Messages are limited to 160 characters.
MN002347A01-A Chapter 6: Messaging 4 Tap to send the message. Sending a Multimedia Message When and where to use: Use this procedure to send multimedia messages. NOTICE: Multimedia messaging is only supported when the LEX L10i is in Public network mode. Procedure: 1 In the main Messaging screen, tap . The New Multimedia Message screen displays. Figure 55: New Multimedia Message Screen 2 In the To field, enter a name or a mobile phone number.
MN002347A01-A Chapter 6: Messaging 4 Tap Send Feedback to send the message.
This page intentionally left blank.
MN002347A01-A Applications Chapter 7 Applications This chapter describes the applications installed on the LEX L10i. Normally, you access the applications through the Home screen overlay by clicking the icon to reveal the the Home screen up from the icon. Swipe icon. Using File Browser Use the File Browser application to view and manage files on the device. To open File Browser, tap → . Figure 56: File Browser Screen The address bar indicates the current folder path.
MN002347A01-A Chapter 7: Applications • Share — Share the file with other devices. Tap to open additional functionality: • Tap the key → New Folder to create a new folder in the current folder. • Tap the key → Search to search for a file or folder. • Tap the key → Sort to sort the list by name, by type, by size or by date. • Tap the key → Refresh to re-display the contents of the current folder.
MN002347A01-A Chapter 7: Applications 5 Edit the contact information. 6 Tap Done. Deleting People When and where to use: Use this procedure to delete contacts. Procedure: 1 In the People application, tap tab. 2 Tap a name to delete. 3 Tap . 4 Tap Delete. 5 Tap OK to confirm. Camera This section provides information for taking photos and recording videos using the integrated digital cameras. NOTICE: If a microSD card is installed, the LEX L10i saves photos and videos on the microSD card.
MN002347A01-A Chapter 7: Applications Figure 57: Camera Photo Screen Table 8: Camera Icons and Actions Call Out Icon Action 1 Camera Options Tap to select Camera, Video, or Panorama mode. 2 Shutter Tap to take a photo, a panoramic photo, or to record a video. 3 Photo Settings Tap to select camera settings. Taking Photos When and where to use: Use this procedure to take photos. NOTICE: For camera settings, see Camera Settings on page 106. Procedure: 1 From the Home screen, tap .
MN002347A01-A Chapter 7: Applications Figure 58: Camera Screen 2 If necessary, tap to open the Camera Option bar and select Camera icon. Figure 59: Camera Option Bar 3 Tap for settings. 4 Frame the subject on screen. 5 To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen.
MN002347A01-A Chapter 7: Applications Figure 60: Camera Zoom 6 Tap . The camera brings the image into focus. When the image is in focus, the focus indicators (top and bottom of screen) turn green and the camera takes a photo. Taking a Panoramic Photo When and where to use: Use this procedure to create a single wide image by panning slowly across a scene. Procedure: 1 From the Home screen, tap . 2 Tap the Camera Options bar and tap .
MN002347A01-A Chapter 7: Applications Figure 62: Panoramic Frame 4 Tap and slowly start panning across the area to capture. A small white square appears inside the button the shot is in progress. If panning too quickly, the message Too fast displays. 5 Tap to end the shot. The panorama is displayed and a progress indicator displays while it saves the image. Recording Videos When and where to use: Use this procedure to record videos. Procedure: 1 From the Home screen, tap .
MN002347A01-A Chapter 7: Applications NOTICE: Video zoom works the same as camera zoom. 4 Point the camera and frame the scene. 5 Tap to start recording. The device starts recording the video. The video time remaining appears in the top left of the screen. 6 Tap to end recording. Camera Settings When you are in Photo mode, photo settings are displayed on the screen. Tap to display the photo settings options.
MN002347A01-A Chapter 7: Applications Figure 65: First More Options Screen - Second More Options Screen. Figure 66: Second More Options Screen - Third More Options Screen.
MN002347A01-A Chapter 7: Applications Figure 67: Third More Options Screen • Switch from front to rear camera or from rear to front camera. Video Settings When in Video mode, video settings are displayed on screen. Tap options.
MN002347A01-A Chapter 7: Applications The available video settings are (from left icon to right icon): • Two screens of More Options. Settings for each option depend on the selected option. You can select an item from a menu or you select an option by clicking it. NOTICE: These options are similar to the video options seen on most cameras. Set the video options accordingly. - First More Options Screen. Figure 69: First More Options Video Screen - Second More Options Screen.
MN002347A01-A Chapter 7: Applications • Perform basic editing of photos • Set photos as wallpaper • Set photos as a contact photo • Share photos and videos To open the Gallery application, tap → . The Gallery presents all photos and videos stored on the microSD card and internal memory. Figure 71: Gallery — Albums • Tap an album to open it and view its contents. The photos and videos in the album are displayed in chronological order. • Tap a photo or video in an album to view it.
MN002347A01-A Chapter 7: Applications Figure 72: Photos/Videos Inside an Album Swipe left or right to scroll images across the screen. Sharing an Album When and where to use: Use this procedure to share an album in your Gallery. Procedure: 1 Tap . 2 Tap . 3 Tap and hold an album until it highlights. 4 Tap other albums as required. 5 Tap . Share applications are displayed. 6 Select the application that you want to use. 7 Follow the instructions within the selected application.
MN002347A01-A Chapter 7: Applications 3 Tap and hold an album until it highlights. 4 Tap . 5 Tap Details. Deleting an Album When and where to use: Use this procedure to delete an album that you no longer need. Procedure: 1 Tap . 2 Tap . 3 Tap and hold an album until it highlights. 4 Tap . 5 Tap Delete. 6 Tap OK to delete the album. Working with Photos Use Gallery to view photos on the microSD card and edit and share photos.
MN002347A01-A Chapter 7: Applications Figure 73: Photo Example 5 Swipe left or right to view the next or previous photo in the album. 6 Turn the LEX L10i to view the photo in upright (portrait) or sideways (landscape) orientation. The photo is displayed (but not saved) in the new orientation. 7 Tap the photo to view the controls. 8 Double-tap the screen to zoom in or pinch two fingers together or spread them apart to zoom in or out. 9 Drag the photo to view parts that are not in view.
MN002347A01-A Chapter 7: Applications Cropping a Photo When and where to use: Use this procedure to crop a photo. Procedure: 1 In the Gallery, tap a photo to view the controls. . 2 Tap 3 Tap . 4 Tap ). The cropping grid displays. Figure 74: Cropping Grid 5 Adjust the endpoints to select the portion of the photo to crop. 6 Tap CROP to save a copy of the cropped photo. The original version is retained.
MN002347A01-A Chapter 7: Applications 4 Tap the photo to open it. 5 Tap . 6 Tap Set picture as. 7 Select a contact. 8 Crop the photo accordingly as described in Cropping a Photo on page 114. 9 Tap SAVE. Sharing a Photo When and where to use: Use this procedure to share a photo. Procedure: 1 Tap . 2 Tap . 3 Tap an album to open it. 4 Tap a photo to open it. 5 Tap . 6 Tap the application to use for sharing the selected photo (for example Bluetooth).
MN002347A01-A Chapter 7: Applications 3 Tap an album to open it. 4 Tap a video. . 5 Tap The video begins to play. 6 Tap the screen to view the playback controls. Figure 75: Video Playback Controls 7 Tap the Pause control. 8 Tap to return to the previous screen or to return to the Home screen. Sharing a Video When and where to use: Use this procedure to share a video. Procedure: 1 Tap . 2 Tap . 3 Tap an album to open it. 4 Tap a video to open it. 5 Tap . The Share menu appears.
MN002347A01-A Chapter 7: Applications 2 Tap . 3 Tap an album to open it. 4 Tap a video to open it. 5 Tap . 6 Tap Delete. 7 Tap OK. Using Sound Recorder Use Sound Recorder to record audio messages. Recordings are saved on the microSD card (if installed) or the Internal Storage and available in the Music application playlist titled My Recordings. The recording process is done in four stages. 1 From the Home screen, tap 2 Tap 3 Tap . . to start a recording.
MN002347A01-A Chapter 7: Applications Figure 77: Record Your Message 5 Tap to stop recording. 6 Tap Done to save the recording.
MN002347A01-A Chapter 7: Applications Voice Dialer Voice Dialer is a speech dialog system that provides natural human interface for users to communicate seamlessly with the device. Users can make phone calls, look up contact information, launch programs or check calendars. 1 From the Home screen, tap 2 Tap . or press the call button on a Bluetooth headset. The following window displays.
MN002347A01-A Chapter 7: Applications 2 Tap or press the call button on a Bluetooth headset. 3 Say Redial. 4 In the Voice Dialer dialog box, tap Redial. The call is initiated. Dialing by Number When and where to use: Use this procedure to dial a number using the phone number. Procedure: 1 From the Home screen, tap 2 Tap . or press the call button on a Bluetooth headset. 3 Say Dial<[phone number]>. 4 In the Voice Dialer dialog box, tap the number that displays. The call is initiated.
MN002347A01-A Wireless Chapter 8 Wireless This section provides information on the wireless features of the LEX L10i. • Wireless Wide Area Network (WWAN) • Wireless Local Area Network (WLAN) • Bluetooth Wireless Wide Area Networks Use Wireless Wide Area Networks (WWANs) to access data over a cellular network.
MN002347A01-A Chapter 8: Wireless Figure 80: USB Cable Connection to Host Computer A USB icon appears at the top of the screen, and the notification Connected as a media device appears briefly at the top of the screen. 2 Tap . . 3 Tap 4 Tap More ... . 5 Tap Tethering & portable hotspot. 6 Check USB tethering. The host computer is now sharing the LEX L10i data connection. Postrequisites: To stop sharing the data connection, uncheck USB tethering or disconnect the USB cable.
MN002347A01-A Chapter 8: Wireless 6 Check Bluetooth tethering. The host computer is now sharing the LEX L10i data connection. Postrequisites: To stop sharing the data connection, uncheck Bluetooth tethering . Configuring Portable Wi-Fi Hotspot Settings Prerequisites: Configure the Wi-Fi Hotspot settings. When and where to use: Use this procedure to turn your LEX L10i into a portable Wi-Fi hotspot. Procedure: 1 Tap . . 2 Tap 3 Tap More ... . 4 Tap Tethering & portable hotspot.
MN002347A01-A Chapter 8: Wireless Figure 81: Set up Wi-Fi Hotspot Dialog Box 6 In the Network SSID text field, edit the network name. 7 Tap the Security option and select a security method from the drop-down list. • Open • WPA2 PSK. 8 In the Password text field, enter a password. NOTICE: If Open is selected in the Security option, a password is not required. 9 Tap Save. Data Usage Data usage refers to the amount of data uploaded or downloaded by the LEX L10i during a given period.
MN002347A01-A Chapter 8: Wireless • Identify mobile hotspots and restrict background downloads that may result in extra charges. By default, when you open the data usage settings screen you see the settings for mobile data: that is, the data network or networks provided by your carrier. Just below the on-off switch, note the data usage cycle. Tap it to choose a different cycle. This date range is the period of time for which the graph displays data usage.
MN002347A01-A Chapter 8: Wireless Limiting Data Connection to a Network You can limit the device Private or Public services or extend the battery life by limiting the data connections to Global networks, LTE networks, or CDMA networks. NOTICE: This feature is only available on some networks. Check with service provider. When and where to use: Use this procedure to limit data connection to a network. Procedure: 1 Tap . . 2 Tap 3 Tap More ... . 4 Tap Mobile networks. 5 Tap Network Mode.
MN002347A01-A Chapter 8: Wireless VPN (MVPN) to communicate through Motorola Solutions mobile VPN. This section describes adding a basic VPN. Motorola Mobile VPN is added and configured by your technical support and requires license certification for use. When and where to use: Use this procedure to add a virtual private network to the LEX L10i (not including the Motorola Mobile VPN). Procedure: 1 Tap . . 2 Tap 3 Tap More... . 4 Tap VPN. 5 Tap Basic VPN . 6 Tap + to add VPN profile.
MN002347A01-A Chapter 8: Wireless 5 Check the emergency alert types you want to receive. . 6 Tap Wireless Local Area Networks Wireless local area networks (WLANs) allow the LEX L10i to communicate wirelessly inside a building. Before using the LEX L10i on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as infrastructure). The infrastructure and the LEX L10i must both be properly configured to enable this communication.
MN002347A01-A Chapter 8: Wireless Figure 82: Settings Screen 3 Slide the Wi-Fi switch to the ON position. 4 Tap Wi-Fi. The LEX L10i searches for WLANs in the area and lists them. Figure 83: Wi-Fi Screen 5 Scroll through the list and select the desired WLAN network.
MN002347A01-A Chapter 8: Wireless 6 For open networks, tap profile once or press and hold and then select Connect to network or for secure networks enter the required password or other credentials then tap Connect. See technical support for more information. The LEX L10i obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol.
MN002347A01-A Chapter 8: Wireless • Tap the EAP method drop-down list and select PEAP, TLS, or TTLS. • Tap the Phase 2 authentication drop-down list and select an authentication method. • If required, tap CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings. • If required, tap User certificate and select a user certificate. Note: User certificates are installed using the Location & security settings.
MN002347A01-A Chapter 8: Wireless • None • WEP • WPA/WPA2 PSK • 802.1x EAP 8 If the network security is None, tap Save. 9 If the network security is WEP or WPA/WPA2 PSK, enter the required password and then tap Save. 10 If the network security is 802.1x EAP enter the information below and then tap Save: • Tap EAP method drop-down list and select PEAP, TLS, or TTLS. • Tap Phase 2 authentication drop-down list and select an authentication method.
MN002347A01-A Chapter 8: Wireless WLAN Configuration Use the WLAN Configuration settings to configure additional WLAN settings. From the Wi-Fi screen, tap → Advanced to view the settings. The following two settings are used to configure WLAN: • • Wi-Fi frequency band - Auto (2.4GHz and 5GHz) —Use both the 2.4 GHz and 5 GHz bands (default). - 5GHz Only — Use only the 5 GHz band. - 2.4GHz Only —Use only the 2.4 GHz band.
MN002347A01-A Chapter 8: Wireless Bluetooth Device The LEX L10i supports Motorola Operations Critical Wireless (OCW) Push-to-talk Pod (NNTN8127) and Bluetooth-enabled device (accessory) through a wireless Bluetooth connection. Adaptive Frequency Hopping Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work.
MN002347A01-A Chapter 8: Wireless Bluetooth Profiles The LEX L10i supports the following Bluetooth services: • Generic Access Profile (GAP) — Use for device discovery and authentication. • Service Discovery Protocol (SDAP) — Handles the search for known and specific services and general services. • Serial Port Profile (SPP) — Sets up a virtual serial port and connects two Bluetooth enabled devices. For example, connecting the LEX L10i to a printer.
MN002347A01-A Chapter 8: Wireless Bluetooth Radio Power for Android Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity. NOTICE: To achieve the best battery life, turn off radios when not in use.
MN002347A01-A Chapter 8: Wireless 8 Tap . Selecting Profiles on a Bluetooth Device Some Bluetooth devices have multiple profiles for different connections. When and where to use: Use this procedure to select a profile on the Bluetooth device that connects to the LEX L10i. Procedure: 1 Tap 2 Tap 3 Tap . . Bluetooth. 4 In the AVAILABLE DEVICES list, tap next to the device name. 5 Under PROFILES, select a profile to use. 6 Tap Send Feedback .
This page intentionally left blank.
MN002347A01-A ADB and USB Driver Setup Chapter 9 ADB and USB Driver Setup This chapter describes how to set up the Android Debug Bridge (ADB) and USB driver for your Windows PC. The ADB and USB driver are required to perform Fastboot OS updates and to capture debug logs using ADB. They are also used to push files onto a device and for APK installation. Required Software and Hardware In order to install the ADB and USB driver, certain software and hardware requirements must be met.
MN002347A01-A Chapter 9: ADB and USB Driver Setup 3 Open the CD drive and copy LEX_L10.zipto your desktop. Figure 86: Access CD 4 Extract the LEX_L10.zip file copied on your desktop to C:\Program Files (x86) or any other location in your OS installation drive where you prefer to keep the driver, and then select OK.
MN002347A01-A Chapter 9: ADB and USB Driver Setup b Tap to return to Settings; then, tap Developer options and click the checkbox for USB Debugging. c Click OK when prompted to allow USB debugging. 6 Configure the driver in the Device Manager. a On your computer, click the Start button and search for Device Manager and open it. Figure 88: Access Device Manager b Find Android under Other devices right-click and select Update Driver Software.
MN002347A01-A Chapter 9: ADB and USB Driver Setup Figure 90: Select Browse my computer for driver software d Click Browse and select the folder where the driver was extracted (that is, C:\Program Files (x86)\Lex L10_ADB_USB_Driver or the custom path chosen by you at the time of extracting the LEX_L10.zip file. e Click OK and then click Next.
MN002347A01-A Chapter 9: ADB and USB Driver Setup f If prompted, select Install this driver software anyway. Figure 92: Select Install this driver software anyway g Click Close to complete the installation. Figure 93: Close the Installation The driver is now installed. 7 Set up the ADB USB profile on your PC as follow-up with these steps: a After driver installation, make sure there is a .android folder in your user profile directory.
This page intentionally left blank.
MN002347A01-A Accessories Chapter 10 Accessories This chapter provides information for using the accessories associated with the LEX L10i. Accessories This section lists the LEX L10i accessories along with specifications. LEX 10i General Accessories: • Replaceable Standard Battery Li Ion 2340 mAh 3.7V • Replaceable High-capacity Battery Pack Li Ion 4680 mAh 3.
MN002347A01-A Chapter 10: Accessories Desktop Cradle A desktop cradle provides an alternative method to charge your LEX L10i. The desktop cradle: • Provides power for charging and operating the LEX L10i • Enables connecting a mouse to the LEX L10i Figure 95: Desktop Cradle Charging the LEX L10i To charge the LEX L10i, insert the LEX L10i units by placing the bottom of the LEX L10i, at a slight forward angle, into the cradle. The LED of the LEX L10i, shows the status of the battery charging.
MN002347A01-A Chapter 10: Accessories Holster Use the holster to securely carry the LEX L10i when working. The holster is threaded through a belt and stores the LEX L10i when not in use or when using a headset. Figure 97: Holster Insert the LEX L10i into the holster with the screen facing in or out.
This page intentionally left blank.
MN002347A01-A Maintenance and Troubleshooting Chapter 11 Maintenance and Troubleshooting This chapter includes instructions on cleaning and storing the LEX L10i. It also provides troubleshooting solutions for potential problems during LEX L10i operation. Maintaining the LEX L10i For trouble-free service, observe the following tips when using the LEX L10i: • Do not scratch or use a pen or a pencil or other sharp object on the surface of the screen. • The touch-sensitive screen is made of polycarbonate.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting • Battery usage by children should be supervised. • Follow local regulations to properly dispose of used rechargeable batteries. • Do not dispose of batteries in fire. • In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting Cleaning Frequency The cleaning frequency is up to your discretion due to the varied environments in which the mobile devices are used. They may be cleaned as frequently as required, but it is advisable to clean the camera window periodically when used in dirty environments to ensure optimum performance. Cleaning the LEX L10i This section includes instructions on how the LEX L10i should be cleaned.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting 5 Use a dry cotton-tipped applicator and repeat steps 4 and 5 at least three times. CAUTION: Do not point nozzle at yourself and others. Ensure that the nozzle or tube is away from your face. 6 Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface. 7 Inspect the area for any grease or dirt, repeat if required. Troubleshooting This section lists common problems and solutions to fix the problems.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting Problem Cause Solution was charging. Extreme battery temperature. Battery does not charge if ambient temperature is below 0 °C (32 °F) or above 45 °C (113 °F). Device removed from USB cable or disconnected from host computer during communication. Reattach the communication cable and re-transmit. Incorrect cable configuration. See technical support. During data communication over WiFi, no data transmitted, or transmitted data was incomplete.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting Problem Cause Solution Battery is depleted. Recharge or replace the battery. Extreme battery temperature. Move device to an area where the ambient temperature is between 0 °C (32 °F) or above 45 °C (113 °F). A message appears stating not enough storage memory. Too many applications installed on the device. Remove user-installed applications on the device to recov- Device cannot find any Bluetooth devices nearby.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting Backing up Contacts To back up contacts, the contacts must be exported to a VCF file which must be copied to a secure location. Prerequisites: Contacts must exist in the contact list. When and where to use: Use this procedure to periodically back up your contacts. Procedure: 1 From the Home screen, tap . 2 Tap . Figure 98: Contacts Menu 3 Select Import/export.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting Figure 99: Import/Export Contacts Popup 4 Select Export to storage.
MN002347A01-A Chapter 11: Maintenance and Troubleshooting 5 Tap OK to export the contacts. The VCF file is saved to the location indicated. 6 Follow the procedure under Backing Up the LEX L10i on page 154 to complete the contacts backup. Resetting the LEX L10i Use this procedure to reset the LEX L10i. When and where to use: If the LEX L10i does not operate properly, perform the following procedure. Procedure: 1 Power off and on the LEX L10i and verify if the problem is gone. The LEX L10i restarts.
This page intentionally left blank.
MN002347A01-A Technical Specifications Chapter 12 Technical Specifications The following table summarizes the LEX L10i operating, environment, and technical hardware specifications. Table 10: Technical Specifications Item Specification Physical Dimensions (H x W x D) 5.62 x 2.85 x 0.547 in 143 x 72.6 x 15 mm Weight 195 g (6.88 Oz) including standard battery Durability Continues to run after multiple drops to concrete from a height of 48 inches (121 cm) Drop tested using MIL-STD-810G Method 516.
MN002347A01-A Chapter 12: Technical Specifications Item Specification Barometer Sensor E-Compass Ports Battery USB 2.0 High-Speed 3.5 mm Audio Jack (stereo) Accessory/Charging Port Standard - 2340 mAH, Li Ion High Capacity - 4680 mAh, Li Ion Software Operating System Android™ KitKat 4.4.
MN002347A01-A Chapter 12: Technical Specifications Item Specification Location Services Standalone GPS Assisted GPS (aGPS) Device Management Remote Management and Configuration Supports OMA-DM (Open Mobile Alliance Device Management) Video and Imaging Supported Formats H.263, H.264, MPEG-4 SP, VP8, JPEG (.jpg), GIF (.gif), PNG (.png), BMP (.bmp), WebP (.webp) Formats supported for playback, streaming and recording Supported File Types 3GPP (.3gp), MPEG-4 (.mp4), WebM (.webm), (.
MN002347A01-A Chapter 12: Technical Specifications Item Desktop Cradle Impact-Rated Vehicle Cradle Weight 12.8 Oz (363 g) 4.
