User's Guide

Table Of Contents
Status Indicators
This chapter explains the status indicators and audio tones
used in the radio.
LED Indicators
LED indicators show the operational status of your radio.
Blinking Red
Radio is indicating a battery mismatch.
4
Radio has failed the self-test upon powering up.
Radio is receiving an emergency transmission.
Radio is transmitting in low battery state.
Radio has moved out of range if Auto-Range
Transponder System is configured.
Mute Mode is enabled.
Solid Green
Radio is powering up.
Radio is transmitting.
Radio is sending a Call Alert or an emergency
transmission.
Blinking Green
Radio is receiving a call or data.
Radio is retrieving Over-the-Air Programming
transmissions.
Radio is detecting activity over the air.
NOTICE:
This activity may or may not affect the
programmed channel of the radio due to the
nature of the digital protocol.
There is no LED indication when the radio is
detecting activity over the air in Capacity Plus.
Double Blinking Green
Radio is receiving a privacy-enabled call or data.
Solid Yellow
Radio is monitoring a conventional channel.
Blinking Yellow
Radio is scanning for activity.
Radio has yet to respond to a Call Alert.
4
Only applicable to models with the latest software and hardware.
English
27