User's Guide

Table Of Contents
Your radio must be programmed to allow you to use this
feature. Check with your dealer or system administrator for
more information.
Making Broadcast Voice Calls
Program your radio to make Broadcast Voice Calls.
1 Select a channel with the active group alias or ID.
2 Do one of the following:
Select a channel with the active group alias or ID.
Press the programmed One Touch Access
button.
3 Press the PTT button to make the call.
The green LED lights up.
4 Do one of the following:
Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
NOTICE:
Users on the channel cannot respond to
Broadcast Voice Calls.
The radio returns to the previous menu after the call ends.
Receiving Broadcast Voice Calls
When you receive a Broadcast Voice Call:
A tone sounds.
The green LED blinks.
Your radio unmutes and the incoming call sounds
through the speaker.
A Broadcast Voice Call does not wait for a predetermined
period before ending.
You cannot respond to a Broadcast Voice Call.
English
37