User's Guide

Receiving Emergency Alarms
When you receive an Emergency Alarm:
• A tone sounds.
•
The red LED blinks.
NOTICE:
Your radio automatically acknowledges the
Emergency Alarm (if enabled).
To return to home screen, perform the following
actions:
a Press .
b Press or to Yes.
c Press to select.
The radio returns to the home screen and the display
shows the Emergency icon.
Reinitiating Emergency Mode
Perform one of the following actions:
• Change the channel while the radio is in
Emergency mode. The radio exits the Emergency
mode, and reinitiates Emergency, if Emergency
Alarm is enabled on the new channel.
•
Press the programmed Emergency On
button
during an Emergency initiation or transmission
state. The radio exits this state, and reinitiates
Emergency.
Exiting Emergency Mode After Sending
the Emergency Alarm
This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when:
• An acknowledgment is received (for Emergency Alarm
only).
•
All retries to send the alarm have been exhausted.
NOTICE:
If your radio is powered off, it exits the Emergency
mode. The radio does not reinitiate the Emergency
mode automatically when it is turned on again.
English
55