User's Guide

Lone Worker
This feature prompts an emergency to be raised if there is
no user activity, such as any radio button press or channel
selection, for a predefined time.
Following no user activity for a programmed duration, the
radio pre-warns you using an audio indicator once the
inactivity timer expires.
If there is still no acknowledgment by you before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to
this feature:
• Emergency Alarm
•
Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state, allowing voice
messages to proceed until action is taken. See Emergency
Operation on page 51 for more information on ways to exit
Emergency.
NOTICE:
Check with your dealer or system administrator for
more information.
Password Lock Features
This feature allows you to restrict access to the radio by
asking for a password when the device is turned on.
Accessing Radios by Using Passwords
Follow the procedure to access your radio by using a
password.
1 Enter the current four-digit password.
• Use the
Channel Selector Knob to enter the first
digit of the password.
• Press Side Button 1 or 2 to enter each digit of the
remaining three digits of the password.
2 Your radio automatically checks the validity of the
password when the last digit of the four-digit
password is entered.
If successful, the radio powers up.
If unsuccessful:
• You hear a continuous tone. Repeat step 1.
•
After the third attempt, your radio enters into
locked state. A tone sounds. The yellow LED
English
57