User's Guide

Table Of Contents
Radio transmits at low power.
If unsuccessful:
The Negative Indicator Tone sounds.
Radio transmits at high power.
Voice Operating Transmission
The Voice Operating Transmission (VOX) allows you to
initiate a hands-free voice-activated call on a programmed
channel. The radio automatically transmits, for a
programmed period, whenever the microphone on the
VOX-capable accessory detects voice.
NOTICE:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
You can enable or disable VOX by doing one of the
following:
Turn the radio off and then power it on again to enable
VOX.
Change the channel by using the Channel Selector
knob to enable VOX.
Turn VOX on or off by using the programmed VOX
button.
Press the PTT button during radio operation to disable
VOX.
NOTICE:
Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or
system administrator for more information.
Turning Voice Operating Transmission
On or Off
Follow the procedure to turn VOX on or off on your radio.
Press the programmed
VOX button to toggle the
feature on or off.
NOTICE:
If the Talk Permit Tone is enabled, use a trigger
word to initiate the call. Wait for the Talk Permit
Tone to finish before speaking clearly into the
microphone. See
Turning Talk Permit Tone On or
Off for more information.
English
62