Safety Manual

1
English
M
RF Energy Exposure and Product
Safety Guide for Mobile Two-Way
Radios installed in Vehicles or as
Fixed Site Control Stations
The information provided in this document
supersedes the general safety information contained
in user guides published prior to January 2008.
RF Energy Exposure Awareness and
Control Information, and Operational
Instructions for FCC Occupational Use
Requirements
NOTICE: This radio is intended for use in
occupational /controlled conditions, where
users have full knowledge of their
exposure and can exercise control over
their exposure to meet FCC/ICNIRP
limits. This radio device is NOT
authorized for general population,
consumer or any other use.
This two-way radio uses electromagnetic energy in
the radio frequency (RF) spectrum to provide
communications between two or more users over a
distance. It uses radio frequency (RF) energy or radio
waves to send and receive calls. RF energy is one
form of electromagnetic energy. Other forms include,
but are not limited to, sunlight and x-rays. RF energy,
however, should not be confused with these other
forms of electromagnetic energy, which when used
improperly, can cause biological damage. Very high
levels of x-rays, for example, can damage tissues and
genetic material.
Before using this radio, read this
guide which contains important
operating instructions for safe
usage and RF energy awareness
and control for compliance with
applicable standards and
regulations.
ATTENTION!
Motorola Solutions, Inc.
1303 E. Algonquin Rd., Schaumburg,
IL 60196, U.S.A.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized
M logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
© 2014 Motorola Solutions, Inc. All rights reserved.
Printed in
*PMLN7262A*
PMLN7262A
*MN001463A01*
MN001463A01-AA
MN001463A01.book Page 1 Monday, January 5, 2015 10:26 AM