User Manual

Table Of Contents
Related Links
Scan on page 102
Setting Talkgroups in the Active Scan List
When and where to use: If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group SetupScanActive List.
NOTICE: If Scanning is Off is displayed, go to Group SetupScanScanning
On to enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
5 Select one of the following:
Delete — Erases this group from the active scan list.
Priority and select new priority to Low, Medium or High.
Setting Scan Lists
When and where to use: If you want to set up any scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select Group SetupScanScan Lists.
3 Highlight required scan list and press MENU to see additional settings:
Rename — Enters new name for that scan list.
Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
Clear — Deletes all the talkgroup assigned to that scan list.
Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup
folders and assign appropriate priority.
Edit — Changes the priority of the required talkgroup or deletes it.
Deleting Talkgroups from Scan Lists
Procedure:
1 From the home screen, press the MENU key.
2 Select Group SetupScanScan Lists.
3 Highlight the required scan list and press MENUEdit.
4 Highlight the required talkgroup and press MENUDelete.
My Groups
My Groups is equivalent to Favorites (next section). Both menu items contain shortcuts to favorite
talkgroups and contact numbers, as well as allow to perform the same operations. For a detailed
description of the feature, please refer to Favorites.
Chapter 5: Main Menu
Send Feedback 103