User Manual

In transmit inhibit mode the radio joins group calls for any group that the radio is monitoring, but the
transmitting on that call is still prohibited.
The radio also displays any incoming SDS messages to the user. The missed call feature is active in
the transmit inhibit mode and allows checking what calls were missed. However, the radio attempts to
prevent call setup retransmission from being recorded as separate calls.
If you initiate an emergency call, the radio immediately leaves transmit inhibit mode and attempts to
start the emergency call if the radio is in service.
If the radio is turned off in the transmit inhibit mode, on turning on the radio asks whether to exit the
transmit inhibit mode. If you choose No, the radio turns off.
Selecting Talkgroups
From the home screen, use one of the following methods:
• Press left or right NAVIGATION key. Press Select to confirm.
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to
confirm.
NOTICE: If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter
the scrolling mode.
NOTICE: Your radio can have an access up to three levels of the folder structure.
Talkgroup Icon Selection
Table 9: Talkgroup Icon
Icon Description
Displayed when the talkgroup is from a different network than the one currently se-
lected.
Using Timed Talkgroup Change
This feature allows you to switch a selected talkgroup between the currently selected talkgroup and a
predefined talkgroup (TMO or DMO), making the predefined talkgroup the selected talk group for a
predefined time by using a One-Touch button. After the timer expires, your radio returns to the
previously selected talkgroup.
Prerequisites: Timed Talkgroup Change is assigned to a One-Touch button.
Procedure:
1 Press and hold and hold the One-Touch button.
2 Your radio switches the selected talkgroup to the predefined talkgroup for a predefined amount
of time.
During the predefined time the radio initiates or joins group communication (SDS, status SDS, or
call) on the predefined talkgroup as the selected talkgroup.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to previously selected talkgroup
Chapter 2: Getting Started
38 Send Feedback