User Manual

This feature can be used as the One-Touch Button.
Activating the Covert Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Covert Mode.
3 Select one of the following:
• On — all tones are set to off, and the backlight and the LED are disabled immediately. The
group audio is routed to the earpiece. The radio displays Covert Mode On.
• Off — all settings for tones, backlight and audio are restored. The radio displays Covert
Mode Off.
SDS Remote Control
SDS Remote Control is a feature that enables to remotely control behavior and configuration of the
radio via special SDS messages. The messages can be sent both in TMO and DMO (including the
Repeater Mode) by any radio capable of controlling other radios. During the execution of the Remote
Control messages, depending on your service provider settings, the radio can play a tone, vibrate, or
display an appropriate icon in the status icon area.
NOTICE: This is a selling feature.
Setting SDS Remote Control
When and where to use: To enable/disable support of special SDS messages that allow remote
control of the radio.
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Remote Control.
3 Select On to enable, or Off to disable remote control.
Setup
This sub-menu allows you to change your radio configuration.
Ring Style
This sub-menu allows you to set the incoming call ring style.
Setting Ring Style
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Ring Style.
3 Select one of the following:
• Duplex — To set the new ring style to all duplex calls.
Chapter 5: Main Menu
88 Send Feedback