Wireless Wheels User’s Guide DRAFT @NNTN6704A@ NNTN6704A
Running the Wireless Wheels Java Application 6 Battery Installation .....................................9 Contents Safety and General Information ............... ii Joystick Controller.............................................9 Vehicle ..............................................................9 Motorola Wireless Remote Control Adapter Installation ..............................11 Electromagnetic Interference/Compatibility....... ii Industry Canada Notice to Users .....................
Safety and General Information Product Name: Wireless Wheels Kit Number NASCAR: NNTN6401A Kit Number Maserati: NNTN6402A Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Industry Canada Notice to Users Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device Ref IC RSS 210 Sec. 5.
stands out on the Car Select List. • Long Distance Control • Car and Transmitter have a range of up to 100 feet* which is double the range of traditional RC cars! Getting Started Recommended:For ages 6 and up.
Getting Started Package Contents Your Wireless Wheels R/C car package contains the following: • • • • • 1-9V battery 4-AA alkaline batteries(1.5V) Wireless Wheels remote control car Wireless Wheels joystick controller Motorola Wireless Remote Control Adapter Battery Requirements • Vehicle : 4 x AA alkaline(1.
Customer Service Customer Service For customer service, contact Nikko Customer Service toll-free at 1-800-736-4556. Additional information can be found on the Nikko America web site at: http://www.nikkoamerica.com Technical Support For technical support, contact Nikko Technical Support toll-free at 1-800-736-4556. Before you call, make a note of the exact problems and error messages you encountered. Additional information can be found on the Nikko America web site at: http://www.nikkoamerica.
Battery Installation Vehicle Joystick Controller Install batteries making sure that the + and - poles of the batteries are positioned accurately. • Make sure vehicle's on-off switch is turned OFF when installing batteries. Note: Do not use Ni-Cd batteries. To Open the Battery Compartment Lid 1 Press and slide off the battery compartment lid. • Make sure vehicle's on-off switch is turned OFF when installing batteries. • Avoid combined use of new dry batterries and old ones.
Battery Installation 3 Then, the battery compartment lid can be pulled and open. 4 AA alkaline (1.
Motorola Wireless Remote Control Adapter Installation Attaching the Motorola Wireless Remote Control Adapter to your Joystick Controller Your Wireless Wheels package contains a Motorola Wireless Remote Control Adapter. 1 Locate the accessory connector on your joystick controller. LED Status Indicator 2 Plug the end of the Motorola Wireless Remote Control Adapter into the accessory connector.
Wireless Remote Control Adapter Status Indicator The wireless remote control adapter has a green light emitting diode (LED) to let you know what it is doing. The blinking pattern will let the user know when the car is ready to drive. The value below is the number of blinks in each pattern. Value State Description 1 Blink Standby The status LED blink pattern will blink a pattern of short (0.1 second) on-off blinks and then turn off the LED for one second and then repeat the blink pattern again.
Motorola Wireless Remote Control Adapter Installation 4 Blinks Disconnected The wireless remote control adapter or Joystick controller was controlling a RC car but has lost the signal. 5 Blinks Scan The RC car is looking for a clear channel to begin operation. This state is not used all that often and will rarely be noticed.
Operating Your Vehicle Important: Please follow the above sequence of operation. Using The Joystick Controller 1 Turn ON the vehicle. 2 Attach the Motorola Wireless Remote Control Adapter to the joystick controller. A blinking LED indicates that the Motorola Wireless Remote Control Adapter is working. See “Wireless Remote Control Adapter Status Indicator” on page 13. Note: The Motorola Wireless Remote Control Adapter will connect to the last car driven, if present.
Adjusting Steering Alignment Adjust the steering alignment lever on the underside of the vehicle when the vehicle doesn't run straight forward.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2005 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.