User's Guide

Exiting Emergency
The dispatch console that supports this feature can be
programmed to clear the emergency state of the radio.
Check with your dealer or system administrator for more
information on dispatch console supporting this feature.
1 To exit emergency, press and hold the
preprogrammed Emergency button for about a
second.
2 Perform one of the following actions:
If… Then…
Press and hold the preprogram-
med Emergency button until
you hear the emergency exit
tone.
a From the Home screen,
swipe down the Status Bar.
b Tap Cancel and confirm the
action by tapping Yes.
If… Then…
Figure 1: Exiting Emergency
Exiting Emergency as Supervisor
(Trunking Only)
Radios configured as Supervisor are able to cancel
emergency mode of other radios. The dispatch console
must be preprogrammed to use this feature. Check with
your dealer or system administrator for more information on
dispatch console supporting this feature.
Perform one of the following actions:
If… Then…
If the emer-
gency mode is
initiated by
other radios,
press and hold the Side But-
ton 1 and press the Emer-
gency button.
English
106