User's Guide

Emergency operations. Scan feature is suspended when
Priority Dispatch is initiated.
Dispatch console that supports this feature must be
preprogrammed to use this feature. Check with your dealer
or system administrator for more information on dispatch
console supporting this feature.
1 Press the preprogrammed Priority Dispatch button.
A tone sounds and the radio enters Priority Dispatch
mode. The radio exits this mode when the Priority
Dispatch Time Out Timer expires.
2 Before the Priority Dispatch Time Out Timer expires,
press and hold the PTT button to transmit.
The display shows the Priority Talkgroup alias.
3 Release the PTT button to listen.
The radio exits Priority Dispatch mode, returns to its
original talkgroup, and displays the home channel
alias.
Dynamic Regrouping (Trunking Only)
This feature allows the dispatcher to temporarily reassign
selected radios to a particular channel where they can
communicate with each other. This feature is typically used
during special operations.
When your radio is dynamically regrouped, it receives a
dynamic regrouping command and automatically switches
to the dynamically regrouped channel. You hear a gurgle
tone and the display shows the name of the dynamically
regrouped channel.
When the dispatcher cancels dynamic regrouping, the radio
automatically returns to the previous zone and channel that
you were using.
If you access a zone or channel that has been reserved as
a dynamically regrouped mode for other users, you hear an
invalid tone.
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when you
want a new dynamic regrouping assignment.
Perform one of the following actions:
English
82