Installation Guide

Figure 2: Front View of Dash Mount Trunnion for MOTOTRBO XPR 5000/5000e
175.3 mm
208.3 mm
Figure 3: Side View of Dash Mount with Low Profile Trunnion for MOTOTRBO XPR 4000/4000e
200.7 mm
210.8 mm
61 mm
50.8 mm
NOTICE: The MOTOTRBO XPR 4000/4000e Series mobile models use wing screws with
thread length of 14.9 mm while the XPR 5000/5000e Series mobile models require wing screws
with thread length of 9.9 mm to secure the radio to the mounting trunnion.
Figure 4: Side View of Dash Mount with Low Profile Trunnion for MOTOTRBO XPR 5000/5000e
188 mm
205.7 mm
63.5 mm
53.34 mm
NOTICE: The rear accessory connector adds 0.75 in (19.1 mm) to the overall length.
1.1.2
Connections on the Back of the Radio
The following figure shows the connections that are found on the back of the radio.
6880309T23-FB
Chapter 1: Introduction
17