User's Guide

Radio leaves lower priority talkgroup call for higher priority
talkgroup call.
NOTICE:
This feature can only be accessed when Talkgroup
Scan feature is enabled.
Priority Monitor feature applies only to members in the
Receive Group List. There are two Priority Talkgroups:
Priority 1 (P1) and Priority 2 (P2). P1 has higher priority
than P2. In Capacity Max system, the radio receives
transmission according to the priority order below:
1 Emergency Call for P1 Talkgroup
2 Emergency Call for P2 Talkgroup
3 Emergency Call for Non-priority Talkgroups in the
Receive Group List
4 All Call
5 P1 Talkgroup Call
6 P2 Talkgroup Call
7 Non-priority Talkgroups in the Receive Group List
See Editing Priority for a Talkgroup on page 110 for more
information on how to add, remove, and/or edit the priority
of the talkgroups in the scan list.
NOTICE:
This feature is programmed by the system
administrator. Check with your dealer or system
administrator for more information.
4.10.5.1
Editing Priority for a Talkgroup
In the Talkgroup Scan Menu, you can view or edit the
priority of a talkgroup.
1
Press
to access the menu.
2
Press or to Scan. Press to select.
3
Press or to View/Edit List. Press
to select.
4
Press or to the required talkgroup. Press
to select.
The current priority is indicated by a Priority 1 or
Priority 2 icon beside the talkgroup.
English
110