User's Guide

If initiated, the green LED blinks once on the target radio.

This feature automatically stops after a programmed

duration or when there is any user operation on the target

radio.

4.10.12.1

Initiating Remote Monitor

Follow the procedure to initiate Remote Monitor on your

radio.

1 Press the programmed Remote Monitor button.

Press or to the required alias or ID.

Press to select.

The display shows a transitional mini notice,

indicating the request is in progress. The green LED

lights up.

3 Wait for acknowledgment.

If successful:

• A positive indicator tone sounds.

• The display shows a positive mini notice.

• The audio from the monitored radio starts playing

for a programmed duration, and the display

shows Rem. Monitor. Once the timer expires, an

alert tone sounds, and the LED turns off.

If unsuccessful:

• A negative indicator tone sounds.

• The display shows a negative mini notice.

4.10.12.2

Initiating Remote Monitor by Using the

Contacts List

Follow the procedure to initiate Remote Monitor on your

radio by using the Contacts list.

Press

to access the menu.

Press

or to Contacts. Press to

select.

English

124