User's Guide

The Quick Status list is configured by using CPS-RM and
comprises up to a maximum of 99 statuses.
The maximum length for each status message is 16
characters.
NOTICE:
Every status has a corresponding digital value
ranging from 0–99. An alias can be specified to
each status for ease of reference.
4.10.20.1
Sending Status Messages
Follow the procedure below to send a status message.
1 Do one of the following:
• Press the programmed One Touch Access
button. Skip the following steps.
• Press
to access the menu.
2
Press or to Status. Press to
select.
3
Press or to Quick Status. Press
to select.
4
Press or to the required status message.
Press to select.
5
Press or to the required subscriber alias
or ID, or group alias or ID. Press
to select.
If successful:
• A positive indicator tone sounds.
• The LED turns off.
• The display shows a positive mini notice momentarily
before returning to the Quick Status screen.
• The display shows beside the sent status message.
If unsuccessful:
• A negative indicator tone sounds.
• The LED turns off.
• The display shows the failure notice momentarily before
returning to the Quick Status screen.
English
151