User's Guide

4.10.33.2
Editing FPC Mode Parameters
Use the following buttons as required while navigating
through the feature parameters.
•
, – Scroll through options, increase/
decrease values, or navigate vertically.
• – Select the option or enter a sub-menu.
• – Short-press to return to previous menu or to exit
the selection screen. Long-press to return to Home
screen.
4.10.34
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTICE:
This feature is applicable to XPR 5550e/XPR 5580e
only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
WPA/WPA2-Enterprise Wi-Fi network
Uses certificate-based authentication.
Your radio must be pre-configured with a certificate.
NOTICE:
Check with your dealer or system administrator
to connect to WPA/WPA2-Enterprise Wi-Fi
network.
The programmed Wi-Fi On or Off button is assigned by
default. Check with your dealer or system administrator to
determine how your radio has been programmed.
Voice Announcements for the programmed Wi-Fi On or
Off button can be customized through CPS according to
English
198