User's Guide

5.2.5.2
Receiving and Responding to a Private
Call
A Private Call is a call from an individual radio to another
individual radio.
When you receive a Private Call, the LED blinks green. The
first line of the display shows the subscriber alias or ID, and
the RSSI icon. The second line displays Private Call
and the Private Call icon. Your radio unmutes and the
incoming call sounds through the speaker of the radio.
1 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If there is no voice activity for a predetermined period of
time, the call ends.
The display shows
Call Ended.
See Making a Private Call on page 248 for details on
making a Private Call.
5.2.5.3
Receiving a Site All Call
A Site All Call is a call from an individual radio to every
radio on the site. It is used to make important
announcements requiring the user's full attention.
When you receive an Site All Call, a tone sounds and the
LED blinks green.
The Group Call icon appears in the top right corner. The
first text line shows the caller alias. The second text line
displays Site All Call. Your radio unmutes and the
incoming call sounds through the radio speaker.
Once the Site All Call ends, the radio returns to the
previous screen before receiving the call. A Site All Call
does not wait for a predetermined period of time before
ending.
English
244