User's Guide

the incoming multi-group call sounds through the radio
speaker.
5.2.6
Making a Radio Call
After selecting your channel, you can select a subscriber
alias or ID, or group alias or ID by using:
• The Channel Selector Knob.
• A programmed One Touch Access button – The One
Touch Access feature allows you to make a Private Call
to a predefined ID easily. This feature can be assigned
to a short or long programmable button press. You can
only have one ID assigned to a One Touch Access
button. Your radio can have multiple One Touch
Access buttons programmed.
• The Contacts list (see Contacts Settings on page 270).
NOTICE:
Your radio must have the Privacy feature enabled
on the channel to send a privacy-enabled
transmission. Only target radios with the same Key
Value and Key ID as your radio will be able to
unscramble the transmission.
See Privacy on page 301 for more information.
5.2.6.1
Making a Call with the Channel
Selector Knob
This feature allows the radio users to make different call
types : Group Call, Private Call, Site All Call, Multi-group
Call.
5.2.6.1.1
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
1 Select the channel with the active group alias or ID.
See Selecting a Call Type on page 242.
2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The Group Call icon
appears in the top right corner. The first text line
shows the group call alias.
English
247