User's Guide

Radio
Control
Steps
dio
Check
button
b Press or to the re-
quired subscriber alias or ID and
press to select.
Menu
a Press to access the menu.
b Press or to Con‐
tacts and press to select.
c Press or to the re-
quired subscriber alias or ID and
press to select.
d Press or to Radio
Check and press
to select.
The display shows the Target Alias, indicating the
request is in progress. The LED lights up solid
green.
2 Wait for acknowledgment.
If the target radio is active in the system, a tone
sounds and the display briefly shows Target Radio
Available.
If the target radio is not active in the system, a tone
sounds and the display briefly shows Target Radio
Not Available.
Radio returns to the subscriber alias or ID screen
when initiated via Menu.
Radio returns to the Home Screen if initiated via the
programmable button.
5.3.4
Remote Monitor
Use the Remote Monitor feature to turn on the microphone
of a target radio (subscriber alias or IDs only). The green
LED will blink once on the target subscriber. You can use
this feature to monitor, remotely, any audible activity
surrounding the target radio.
Your radio must be programmed to allow you to use this
feature.
English
260