User's Guide

5.3.7

Turning Scan On or Off

NOTICE:

This procedure turns the Scan feature On or Off for

all zones with the same Network ID as your

currently selected zone. It is important to note that

even when the Scan feature is turned on via this

procedure, scan may still be disabled for some (or

all) groups on your scan list. See the next section

for more information.

If Scan is turned on, the Scan icon appears on your

display. When Scan is on and you are not participating in a

call, the LED blinks green and yellow.

The procedure for turning Scan on or off depends on how

your radio is programmed. If programmed with a Scan

On/Off button, use the button to toggle the feature on or off.

If your radio has been programmed so that Scan can be

turned on or off via the menu, follow the procedure

described next.

Press to access the menu.

Press or to Scan and press to

select.

Press or to Turn On or Turn Off and

press to select.

• The display shows Scan On momentarily if scan

is disabled.

• The display shows Scan Off momentarily if scan

is enabled.

English

264