User's Guide

The display shows Enable if scan is currently
disabled for the Group.
The display shows Disable if scan is currently
enabled for the Group.
5
Select the displayed option (Enable or Disable) and
press to select.
Depending on which option was selected, the radio
momentarily displays Scan Enabled or Scan
Disabled as confirmation.
The radio displays the Zone scan list again. If scan was
enabled for the Group, the check mark displays before the
Group name. If scan was disabled for the Group, the check
mark is removed before the Group name.
5.3.9
Add or Delete a Group via the Add
Members Menu
The Connect Plus radio does not allow a duplicate group
number or a duplicate group alias to be placed on a zone
scan list (or to be shown as a "scan candidate"). Thus, the
list of "scan candidates" described in step 6 and step 7
sometimes changes after adding or deleting a group from
the zone scan list.
If your radio has been programmed to allow you to edit the
scan list, you can use the Add Members menu to add a
group to the scan list of the currently selected zone, or to
delete a group from the scan list of the currently selected
zone.
1
Press to access the menu.
2
Press
or to Scan option and press
to select.
3
Press
or to <Add Members> and press
to select.
The display shows Add Members from Zone n (n =
the Connect Plus zone number of the first Connect
Plus zone in your radio with the same Network ID as
your currently selected zone).
4 Do one of the following.
English
266