User's Guide

5.3.19.1
Sending a Quick Text Message
Your radio supports a maximum of 10 Quick Text
messages as programmed by your dealer.
While Quick Text messages are predefined, you can edit
each message before sending it.
If you are sending the message, perform the
following to select a recipient:
• Press
or to the required alias and
press to select.
• Press or to Manual Dial, and press
to select. The first line of the display shows
Number:. The second line of the display shows a
blinking cursor. Key in the subscriber alias or ID
and press .
The display shows Sending Message, confirming
your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows Message Sent.
If the message cannot be sent, a low tone sounds
and the display shows Message Send Failed.
If the text message fails to send, the radio returns
you to the Resend option screen (see Managing Fail-
to-Send Text Messages on page 292).
5.3.19.2
Sending Quick Text Messages with the
One Touch Access Button
To send a predefined Quick Text message to a
predefined alias, press the programmed One Touch
Access button.
The display shows Sending Message.
If message is successfully sent, your radio shows the
following indications:
• A positive tone sounds.
• The display shows Message Sent.
If message fails to be sent, your radio shows the following
indications:
• A negative tone sounds.
English
289