User's Guide

5.3.26.20.6
Checking the Firmware Version and
Codeplug Version
Displays the firmware version on your radio.
1
Press
to access the menu.
2
Press or to Utilities and press
to select.
3
Press or to Radio Info and press
to select.
4
Press or to Versions and press to
select.
The display a list with the following information:
• (Radio) Firmware Version
• (Radio) Codeplug Version
• Option Board Firmware Version
• Option Board Frequency Version
• Option Board Hardware Version
• Option Board Codeplug Version
5.3.26.20.7
Checking for Updates
Connect Plus provides the ability to update certain files
(Option Board Codeplug, Network Frequency File, and
Option Board Firmware File) Over-The-Air (OTA).
NOTICE:
Check with the dealer or network administrator to
determine whether this feature has been enabled for
your radio.
Any display Connect Plus radio has the ability to show its
current Option Board OTA Codeplug CRC, Frequency File
version or Option Board firmware file version by using a
menu option. In addition, display radios that have been
enabled for over-the-air file transfer can display the version
of a "pending file". A "pending file" is a Frequency File or
Option Board firmware file that the Connect Plus radio
knows about through system messaging, but the radio has
not yet collected all of the file packets. If a display Connect
Plus radio has a pending file, the menu provides options to:
• See the version number of the pending file.
English
339