User's Guide

10 If the deaccess code was not preconfigured, enter
the deaccess code when the display shows De-
Access Code:, and press to proceed.
The radio returns to the previous screen. The DTMF
Tone sounds and the display shows Ending Phone
Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
If the call fails to end, the radio returns to the Phone
Call screen. Repeat step 9 and step 10, or wait for
the telephone user to end the call. When you press
the PTT button while in the Phone Contacts screen,
as tone sounds and the display shows Press OK to
Place Phone Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
If the call ends while you are entering the extra digits
requested by the Phone Call, your radio returns to
the screen you were on prior to initiating the call.
NOTICE:
During the channel access, press to dismiss
the call attempt and a tone sounds.
During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as the
input for extra digits, your radio attempts to end the
call.
During channel access and access/ deaccess code
or extra digits transmission, your radio responds to
On/Off button, Volume Knob, and Channel
Rocker only. A tone sounds for every invalid input.
6.10.5.3
Making Phone Calls by Using the
Manual Dial
Follow the procedure to make Phone Calls on your radio by
using the manual dial.
1
Press
to access the menu.
English
382