User's Guide

When you receive a Phone Call as a Private Call:
• The display shows the Phone Call icon at the top right
corner.
• The display shows the caller alias or Phone Call.
If Phone Call capability is not enabled on your radio, the
first line of the display shows Unavailable and your radio
mutes the call. Your radio returns to the previous screen
when the call ends.
1 Press the PTT button to respond to the call. Release
the PTT button to listen.
2
Press to end the call.
The display shows Ending Phone Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
If the call fails to end, the radio returns to the Phone
Call screen. Repeat this step or wait for the
telephone user to end the call.
6.10.6
Initiating Transmit Interrupt
An ongoing call is interrupted, when you perform the
following actions:
• Press the Voice PTT button.
• Press the Emergency button.
• Perform data transmission.
• Press the programmed TX Interrupt Remote
Dekey button.
The recipient radio displays Call Interrupted.
6.10.7
Talkaround
This feature allows you to continue communicating when
your repeater is non-operational, or when your radio is out
of range from the repeater but within the talk range of other
radios.
English
389