User's Guide

tone sounds and the radio returns to the previous
screen.
• Press One Touch Access button. The DTMF
tone sounds. If the entry for the One Touch
Access button is empty, a negative indicator tone
sounds.
9
Press to end the call. If deaccess code was
not preconfigured in the Contacts list, the first line of
the display shows De-Access Code:. The second
line of the display shows a blinking cursor. Enter the
deaccess code and press to proceed. The
radio returns to the previous screen. The DTMF tone
sounds and the display shows Ending Phone Call.
If successful, a tone sounds and the display shows
Phone Call Ended. Your radio returns to the Phone
Call screen. If unsuccessful, your radio returns to the
Phone Call screen. When you press the PTT button
while in the Phone Contacts screen, as tone sounds
and the display shows Press OK to Place Phone
Call. When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
If the call ends while you are entering the extra digits
requested by the Phone Call, your radio returns to
the screen you were on prior to initiating the call.
NOTICE:
During the channel access, press to dismiss
the call attempt and a tone sounds button or to exit
alias search. Press button or to exit alias
search. During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as the
input for extra digits, your radio attempts to end the
call. During channel access and access/deaccess
code or extra digits transmission, you radio
responds to On/Off button, Volume Knob, and
Channel Rocker only. A tone sounds for every
invalid input.
6.10.8.4
Receiving Broadcast Voice Calls
When you receive a Broadcast Voice Call:
• A tone sounds.
• The green LED blinks.
English
393