User's Guide

Getting Started
Getting Started provides instructions to prepare your radio
for use.
1.1
Turning the Radio On
Press the On/Off button.
If successful, your radio shows the following indications:
A tone sounds.
NOTICE:
If the Tones/Alerts function is disabled, there is
no tone upon powering up.
The green LED lights up.
The display shows MOTOTRBO (TM), followed by a
welcome message or image.
The Home screen lights up.
If your radio does not power up, check your battery. Make
sure that the battery is charged and properly attached.
Contact your dealer if your radio still does not power up.
1.2
Turning the Radio Off
Press and hold the On/Off button.
The radio may take up to seven seconds to
completely turn off.
The display shows Powering Down.
1.3
Adjusting the Volume
To adjust the volume of your radio, perform one of
the following actions:
To increase the volume, turn the On/Off/Volume
Control knob clockwise.
To decrease the volume, turn the On/Off/Volume
Control knob counterclockwise.
NOTICE:
Your radio can be programmed to have a
minimum volume offset where the volume
level cannot be lowered past the
programmed minimum volume.
English
43