User's Guide

• Change the channel while the radio is in
Emergency mode.
NOTICE:
You can reinitiate emergency mode only if
you enable emergency alarm on the new
channel.
• Press the programmed Emergency On button
during an emergency initiation or transmission
state.
The radio exits the Emergency mode, and reinitiates
Emergency.
6.11.13.9
Exiting Emergency Mode After Sending
the Emergency Alarm
This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when:
• An acknowledgment is received (for Emergency Alarm
only).
• All retries to send the alarm have been exhausted.
NOTICE:
If your radio is powered off, it exits the Emergency
mode. The radio does not reinitiate the Emergency
mode automatically when it is turned on again.
Follow the procedure to exit Emergency mode on your
radio.
Do one of the following:
• Press the programmed Emergency Off button.
• Change the channel to a new channel that has no
emergency system configured.
The display shows No Emergency.
6.11.13.10
Deleting an Alarm Item from the Alarm
List
1
Press
to access the menu.
2
Press
or to Alarm List. Press to
select.
English
436