User's Guide

• Your radio unmutes and the incoming call sounds

through the speaker.

NOTICE:

Recipient users are not allowed to Talkback during

a Broadcast Call. The display shows Talkback

Prohibit. The Talkback Prohibit Tone plays

momentarily if the PTT button is pressed during a

Broadcast Call.

4.9.3

Private Call

A Private Call is a call from an individual radio to another

individual radio.

There are two ways to set up a Private Call.

• The first call type is called Off Air Call Set-Up (OACSU).

OACSU sets up the call after performing a radio

presence check and completes the call automatically.

• The second type is called Full Off Air Call Set-Up

(FOACSU). FOACSU also sets up the call after

performing a radio presence check. However, FOACSU

calls require user acknowledgment to complete the call

and allows the user to either Accept or Decline the call.

The type of call is configured by the system administrator.

NOTICE:

Both the call initiator and recipient are able to

terminate an on-going Private Call by pressing

4.9.3.1

Making Private Calls

Your radio must be programmed for you to initiate a Private

Call. If this feature is not enabled, you hear a negative

indicator tone when you initiate the call. If the target radio is

not available, a short tone sounds and the display show

Party Not Available.

1 Do one of the following:

• Select a channel with the active subscriber alias

or ID. See Selecting a Call Type on page 69.

• Press the programmed One Touch Access

button.

2 Press the PTT button to make the call.

The green LED lights up. The display shows the

Private Call icon, the subscriber alias, and call

status.

English