User's Guide

3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
5 The call ends when there is no voice activity for a
predetermined period. You will hear a short tone.The
display shows Call Ended.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing .
4.9.3.2
Making Private Calls by Using the
Programmable Number Key
Follow the procedure to make Private Calls on your radio
by using the programmable number key.
1 Long press the programmed number key to the
predefined alias or ID when you are on the Home
screen.
If a number key is assigned to an entry in a particular
mode, this feature is not supported when you long
press the number key in another mode.
A negative indicator tone sounds if the number key is
not associated to an entry.
2 Press the PTT button to make the call.
The green LED lights up. The display shows the
Private Call icon, subscriber ID or alias, and call
status.
3 Release the PTT button to listen.
The green LED blinks when the target radio
responds. The display shows the destination alias.
4 The call ends when there is no voice activity for a
predetermined period. You will hear a short tone.
The display shows Call Ended.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing .
See Assigning Entries to Programmable Number Keys on
page 413 for more information.
English
82