User's Guide

• The green LED blinks.

To decline a Private Call configured as FOACSU, do

one of the following:

• Press or to Reject and press

to decline a Private Call.

• Press

to decline a Private Call.

4.9.4

All Calls

An All Call is a call from an individual radio to every radio

on the site or every radio at a group of sites, depending on

system configuration.

An All Call is used to make important announcements,

requiring full attention from the user. The users on the

system cannot respond to an All Call.

Capacity Max supports Site All Call and Multi-site All Call.

The system administrator may configure one or both of

these in your radio.

NOTICE:

Subscribers can support System-Wide All Calls but

Motorola Solutions infrastructure does not support

System-Wide All Calls.

4.9.4.1

Making All Calls

Your radio must be programmed for you to make an All

Call.

1 Select a channel with the active All Call group alias

or ID. See Selecting a Call Type on page 69.

2 Press the PTT button to make the call.

The green LED lights up. The display shows the

Group Call icon and either All Call, Site All

Call, or Multi Site Call depending on the type

of configuration.

3 Do one of the following:

• Wait for the Talk Permit Tone to end and speak

clearly into the microphone if enabled.

• Wait for the PTT Sidetone to end and speak

clearly into the microphone if enabled.

English